PLUNGER TORCH BY: DIzzIE Ó2000 This phile will teach you how to make a torch using a toilet plunger, and some other standard stuff. 1) Steady the plunger, the suction cup facing upwards, by sticking the handle of the plunger in the ground or something. 2) Pour some lighter fluid, gasoline, alcohol, or other flammable liquid into the suction cup. Fill it up about ¾ of the way. Check to make sure there are no leaks. 3) Get a little wad of cotton, or just a couple of those cotton balls (they sell them practically at any store, look around the cosmetics section) and tie or glue them together, to form a little wad of cotton, soak the cotton in the flammable liquid and put it in the middle of the filled suction cup of the plunger. Make sure that at least part of the cotton is sticking out. 4) Light the tip of the cotton sticking out. 5) TADA! You now have your very own plunger torch! The bigger the wad of cotton you put in, the bigger the flame is going to be, just make sure the wad isn't too big or it will soak up all the lighter fluid and will burn out quickly. Also, sometimes the rubber sides of the suction cup get set on fire, so if you want to reuse the plunger it is best to first completely cover the suction cup (both inside and outside) with one or two layers of tin foil. Have fun kiddies! email me: xcon0@yahoo.com