------------------------------------------------------------------------------- DIAMONDTEL (MITSUBISHI) MESA 52 and 55 (Handset Programming) ------------------------------------------------------------------------------- NAM Type: Tri-State Manufacturer: Mitsubishi Programmer: Handset (phone can also be programmed with NAM, see MESA 40, 50, 52 and 55 programming) ESN Prefix DEC: 134 Hex: 86 ESN, S/N Match Required: Yes Available Channels: 666 Programming Sequence: Power On (hold for 1 second) Depress and hold CLR while keying 1951426 or 8291112 (if phone has been programmed 3 times) must be entered within 10 seconds Press SEND to enter data and increment CLR may be used to correct an entry Write NAM information with END key Mobile Number: 10 XXX-XXX-XXXX + SEND Security Code: 3 XXX + SEND System ID Format: 5 XXXXX + SEND Local Use Option: 1 1 + SEND MIN Option: 1 1 + SEND Initial Paging Channel: 4 0333 or 334 + SEND Access Overload Class: 2 XX + SEND Preferred System: 1 0 (B) or 1 (A) + SEND Group ID Format: 2 XX + SEND End-to-End Signalling: 1 1 + SEND Handsfree Option: 1 1 (if equipped) + SEND Roam Inhibit: 1 0 or 1 + SEND Aux Option1: 2 00 to 07 + SEND (see bottom) Aux Option2: 2 00 or 07 + SEND (see bottom) Aux Option1 Second Non-Resettable Extended DTMF Handset Cumulative Timer 01 x x 02 x 03 x x 04 x 05 x x 06 x x 07 x x x Aux Option2 Cumulative Timer Increment 00 60 seconds 01 30 seconds 02 20 seconds 03 15 seconds 04 12 seconds 05 10 seconds 06 6 seconds 07 1 second Horn Alert: FCN + 4 New Unlock Code: FCN + 1 + 3-digit security code (current unlock code will appear) + new 3-digit unlock code + CLR System Select: FCN + # + # + #, etc. (the following will be displayed): Pref A Pref B Only A Only B H Only Press CLR to enter selection and exit. ------------------------------------------------------------------------------- DIAMONDTEL (MITSUBISHI) MESA 40, 50, 51 and 55 (NAM Program) ------------------------------------------------------------------------------- NAM Type: Tri-State Manufacturer: Mitsubishi Programmer: Motorola 1801 -- Celnam, Curtis, or Handset (51 and 55 only) ESN Prefix DEC: 134 HEX: 86 ESN, S/N Match Required: No Programmable Handset: 52 and 55 only Available Channels: 666 Phone Number Format: XXX-XXX-XXXX Lock Code Format: XXX MIN Option: Enabled Repertory Option: Enabled Handsfree Option: Disabled Local Use Option: Enabled End-to-End Signalling: Enabled Horn Alert option: Enabled System ID Format: XXXXX Preferred System: A or B Access Overload Class: XX Group ID Format: XX Initial Paging Channel: 333 or 334 Station Class: 00 Horn Alert: FCN + 4 New Unlock Code: FCN + 1 + 3-digit security code (current Unlock Code will appear) + new 3-digit Unlock Code + CLR System Select: STO + # + # + # etc.. (one of the following will appear) AAABBB or BBBAAA Standard BBBAAA or AAABBB Alternate C50A Home A only C50B Home B only AAAAAA A only BBBBBB B only Press CLR to enter selection and exit. ------------------------------------------------------------------------------- DIAMONDTEL MESA 60, 60X and 80X portable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: Mitsubishi Programmer: Handset ESN Prefix DEC: 134 HEX: 86 ESN, S/M Match Required: No Programmable Handset: Yes Available Channels: 666 Programming Sequence: Power On (END/FCN + 0, simultaneously) Hold CLR and enter 6926232 (within 10 seconds) Enter step information then press SND Press END to write NAM information Mobile Number: 10 XXX-XXX-XXXX Security Code: 4 XXXX System ID Format: 5 XXXXX Local Use Option: 1 1 MIN Option: 1 1 Initial Paging Channel: 3 333 or 334 Access Overload Class: 2 XX Preferred System: 1 0 (B) or 1 (A) Group ID Format: 2 XX End-to-End Signalling: 1 1 Roam Inhibit: 1 0 A/B Selectable: 1 1 Auto Lock: 1 0 Aux: 1 0 New Unlock Code: FCN + STO + 4-digit security code (NAM) + new 3-digit unlock code System Select: FCN + 1 + X X=0 AB or BA Standard X=1 BA or AB Alternate X=2 Home X=3 Pref Only X=4 Non-Pref Only ------------------------------------------------------------------------------- DIAMONDTEL MESA 90X and 99X portables ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: Mitsubishi Programmer: Handset ESN Prefix DEC: 134 HEX: 86 ESN, S/N Match Required: No Programmable Handset: Yes Programming Sequence: Power On Depress and hold END while inputting 5132920 or 6972814 (must be input within 10 seconds) Enter information for each step then press SEND to increment Press END to write NAM information Dual Number: 1 0 (1 number) or 1 (2 numbers) + SEND Mobile Number: 10 XXX-XXX-XXXX + SEND System ID Format: 5 XXXXX + SEND Local Use Option: 1 1 + SEND MIN Option: 1 1 + SEND Initial Paging Channel: 4 333 or 334 + SEND Access Overload Class: 2 XX + SEND Preferred System: 1 0 (B) or 1 (A) + SEND Group ID Format: 2 XX + SEND Roam Inhibit: 1 0 + SEND VOX (DTX): 1 (0 or 1) + SEND 2 Mobile Number: 10 XXX-XXX-XXXX + SEND 2 System ID Format: 5 XXXXX + SEND 2 Local Use Option: 1 1 + SEND 2 MIN Option: 1 1 + SEND 2 Initial Paging Channel: 4 0333 or 0334 + SEND 2 Access Overload Class: 2 XX + SEND 2 Preferred System: 1 0 (B) or 1 (A) + SEND 2 Group ID Format: 2 XX + SEND 2 Roam Inhibit: 1 (0 or 1) + SEND 2 VOX (DTX): 1 (0 or 1) + SEND 2 Auto Retry: 1 (0 or 1) + SEND Security Code: 4 XXXX + SEND End-to-End Signalling: 1 1 + SEND Continuous DTMF: 1 (0 or 1) + SEND Auto Lock: 1 (0 or 1) SEND Booster: 1 0 + SEND Audible Timer: 1 (0 or 1) + SEND Press END to exit program mode. ------------------------------------------------------------------------------- DIAMONDTEL MESA 92 transportable/portable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: Mitsubishi Programmer: Handset ESN Prefix DEC: 134 HEX: 86 ESN, S/N Match Required: No Stamped Model # : 1st 2 digits of serial # are 92 Programmable Handset: Yes Available Channels: 832 Programming Sequence: Power On Depress and hold END while inputting 1951426 or 8291112 (if phone has been programmed 3x) enter within 10 seconds Enter information for each step then press SEND to increment Press END to write NAM information # of digits Dual Number: 1 0 (1 number) or 1 (2 numbers) + SEND Mobile Number: 10 XXX-XXX-XXXX + SEND System ID Format: 5 XXXXX + SEND Local Use Option: 1 1 + SEND MIN Option: 1 1 + SEND Initial Paging Channel: 4 0333 or 0334 + SEND Access Overload Class: 2 XX + SEND Group ID Format: 2 XX + SEND Timer increment: 1 0 + SEND (if Dual Number was 0 then skip 2nd programming sequence) 2 Mobile Number: 10 XXX-XXX-XXXX + SEND 2 System ID Format: 5 XXXXX + SEND 2 Local Use Option: 1 1 + SEND 2 MIN Option: 1 1 + SEND 2 Initial Paging Channel: 4 0333 or 0334 + SEND 2 Access Overload Class: 2 XX + SEND 2 Group ID Format: 2 XX + SEND 2 Timer increment: 1 0 + SEND Security Code: 4 XXXX + SEND VOX: 1 (0 or 1) + SEND Roam Inhibit: 1 (0 or 1) + SEND Continuous Tone: 1 (0 or 1) + SEND Disable Cumulative: 1 (0 or 1) + SEND Disable ignition sense: 1 (0 or 1) + SEND Disable own # display: 1 (0 or 1) + SEND SID Lockout: 1 (0 or 1) + SEND Dual Handset: 1 (0 or 1) + SEND RJ11 Option: 1 (0 or 1) + SEND Press END to exit Program mode. New Unlock Code: FCN + 7 + 4-digit security code (NAM) + new 3-digit unlock code System Select: FCN + 1 + x X=0 AB or BA Standard X=1 BA or AB Alternate X=2 Home X=3 Pref only X=4 Non-Pref only Press CLR to exit. ------------------------------------------------------------------------------- DIAMONDTEL MESA 95 transportable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: Mitsubishi Programmer: Handset ESN Prefix DEC: 134 HEX: 86 ESN, S/N Match Required: No Programmable Handset: Yes Available Channels: 832 Programming Sequence: Power On Depress and hold END while inputting 1951426 or 8291112 (if phone has been programmed 3x) Enter information for each step then press SEND to increment Press END to write NAM information # of digits Dual number: 1 0 (1 number) or 1 (2 numbers) + SEND Mobile Number: 10 XXX-XXX-XXXX + SEND System ID Format: 5 XXXXX + SEND Local Use Option: 1 1 + SEND MIN Option: 1 1 + SEND Initial Paging Channel: 4 0333 or 0334 + SEND Access Overload Class: 2 XX + SEND Preferred System 1: 1 (0) B or 1 (A) + SEND Group ID Format: 2 XX + SEND Timer Increment: 1 0 (0-7) + SEND (if Dual Number was 0 then skip 2nd NAM programming) 2 Mobile Number: 10 XXX-XXX-XXXX + SEND 2 System ID Format: 5 XXXXX + SEND 2 Local Use Option: 1 1 + SEND 2 MIN Option: 1 1 + SEND 2 Initial Paging Channel: 4 0333 or 0334 + SEND 2 Access Overload Class: 2 XX + SEND 2 Preferred System: 1 0(B) or 1(A) + SEND 2 Group ID Format: 2 XX + SEND 2 Timer increment: 2 0(0-7) + SEND Security code: 4 XXXX + SEND End-to-End Signaling: 1 1 + SEND VOX: 1 0 (0 or 1) + SEND Handsfree: 1 0 (0 or 1) + SEND Roam Inhibit: 1 0 (0 or 1) + SEND Continuous Tone: 1 0 (0 or 1) + SEND Disable Cumulative: 1 0 (0 or 1) + SEND Disable Ignition sense: 1 0 (0 or 1) + SEND Dual Handset: 1 0 (0 or 1) + SEND New Unlock Code: FCN + 1 + 4-digit security code (NAM) + new 3-digit unlock code + CLR System Select: FCN + # + # (press CLR to select)