PANASONIC EB 300, EZ542, EZ952 SERIES, EF6106EA AND EF6110EA. NOTES: This is a single NAM mobile or transportable unit. The ESN prefix is 136 decimal & 88 hex. Panasonic: 201-392-6053 NAM PROGRAMING: 1. This unit requires a programing adaptor, if you do not have one try one of the following: Jumper pins 3 and 25 of a standard power cable. If the phone has a transportable pack you can wire a 25 pin "D" socket to a 25 pin "D" plug, wire it straight through and jump pins 3 and 25. Connect this between the tranceiver and transportable pack. A ribbon cable with crimp on "D" connectors makes a convienient adaptor. 2. Turn power on with pins 3 and 25 jumpered. 3. Enter * 0 0 0 0 #, the "In Use" lamp will light briefly then the phone will display "0", you are now in maintenance mode. 4. Enter * 1 SND, the "In Use" lamp will light briefly then the phone will display "1". 5. Enter 5 0 SND, the "In Use" lamp will light briefly and the display will clear. You are now in programing mode. 6. Each data entry can be looked at by pressing RCL followed by the location (step) number below. 7. To store new data enter the value, press STO followed by the location (step) number below. For example to enter a system ID of 00031 enter 00031 STO 01. Data can be entered or reviewed in any order. 8. At any time press STO * * to complete programing and return to maintenance mode. 9. Press END to exit maintenance mode, or turn the power off. PROGRAMING DATA: STEP# #OF DIGITS/RANGE DESCRIPTION 01 00000 - 32767 SYSTEM ID 02 10 DIGITS MIN (AREA CODE & TEL NUMBER) 03 3 OR 4 DIGITS LOCK CODE 04 UP TO 12 DIGITS SPEED DIAL NUMBER (PERMANENT NUMBER STORED IN LOCATION 00) 05 00 OR 08 STATION CLASS MARK 06 333 OR 334 INITIAL PAGING CHANNEL 07 2 DIGITS ACCESS OVERLOAD CLASS 08 2 DIGITS GROUP ID (10 IN USA) 09 8 DIGIT, 0 OR 1 SEE NOTE 1 BELOW. 10 8 DIGIT, 0 OR 1 SEE NOTE 2 BELOW 11 8 DIGIT, 0 OR 1 SEE NOTE 3 BELOW 12 2 DIGIT DIALED DIGIT LIMIT, 00=16, 01=15, 02=14 ETC. NOTES: 1. Suggested entry is: 11111100 for "A" system, 11011100 for "B" system. Digit 1 = Local use Mark Digit 2 = MIN Mark Digit 3 = Preferred System Digit 4 = End To End (DTMF) Dialing. Digit 5 = Repertory (speed) Dialing. Digit 6 = Horn Alert Digit 7 = Not Used Digit 8 = Not Used 2. Suggested entry is: 00000100. Digit 1 = Not Used Digit 2 = Built in Monitor Digit 3 = Auto Lock Digit 4 = Not Used Digit 5 = Not Used (Enable only one of the following) Digit 6 = Allow user A/B select Digit 7 = Preferred system only Digit 8 = Home system only (no Roam) 3. Suggested entry is: 11000011. Digit 1 = Received call indicator (call in absence) Digit 2 = Continuous DTMF Digit 3 = Not Used Digit 4 = Not Used Digit 5 = Not Used Digit 6 = Not Used Digit 7 = Enable total timer Digit 8 = Enable individual call timer LOCK: F LOCK. UNLOCK: Enter three of four digit code. A/B SYSTEM SELECT: 1. Pref/Non-Pref: F #, (phone will default to preferred/non-preferred on every power up) 2. A only: F 9 3. B only: F 8 4. Home only: F 7