OKI 21 NOTES: This is a single NAM unit. The ESN prefix is 129 decimal & 81 hex. OKI: 1-800-554-3112 TO ACCESS PROGRAMING MODE: New or reset units: 1. Turn power on. 2. Within 30 seconds press * & # keys together and release, enter * 1 2 3 4 5 6 7 8 #. 3. The phone will display "EntEr PW-Sto" you may enter a ten digit password at this stage to be used in future re-programings. Press STO to retain default password or enter a ten digit password and press STO. 4. The phone will display "rE EntEr PW-Sto" re-enter the password, press STO to confirm. Again, press STO to retain default password. Back door: 1. If the password is not known substitute the following code in step 2 above: * 7 4 6 4 6 9 5 2 #. Reprograming if a password has been set, and is known: 1. Turn power on. 2. With in 30 seconds press STO & RCL keys together and release, enter the 10 digit password. If you are successful the phone will enter programing mode. NAM PROGRAMING: Having completed one of the above access methods the phone will display the software version and hex ESN. Press CLR to continue, the phone will display "PrESS 1 THRU 9". All OKI phones should be initialized prior to programing, press 0 and phone will display "rESET PrESS 0", press 0 again and display will change to "CLEArED". You may now go directly to any entry by pressing the number of that step, or use volume up and down keys to scroll. 1. The STO key stores each entry. 2. The Volume UP key scrolls down through the steps. 3. The Volume DOWN key scrolls UP through the steps. 4. At any time press CLR to exit program mode. PROGRAMMING DATA: STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION 1 10 DIGITS OWN MIN (AREA CODE & PHONE NUMBER) 2 5 DIGITS Sid no SYSTEM ID 3 333 OR 334 IPCH IPCH AUTOMATICALLY SET 4 2 DIGITS ACCoLC ACCESS OVERLOAD 5 3 OR 4 DIGITS Loc CodE LOCK CODE 6 2 DIGITS gid GROUP ID (10 FOR USA) 7 4 DIGITS Stn CLS STATION CLASS MARK, USE 1000. 8 4 DIGITS/0 OR 1 OPt bit OPTION BITS: 1 enables, from left to right: Min Mark Local Use Mark Hands Free NOT USED 9 6 DIGITS SECURITY SECURITY CODE (DEFAULT IS LAST SIX DIGITS OF ESN OR 111002) LOCK: F 5 then one to eight digit code. UNLOCK: Enter one to eight digit code. SYSTEM SELECT: F 2 then six digit security code, 2 to scroll, STO to store.