OKI CDL 600 series, 700, ACC91



NOTES:  These units are dual NAM.

        The ESN prefix is 129 decimal & 81 hex.

        OKI: 1-800-554-3112



NAM PROGRAMING:



1.  All phones should be initialized prior to programing, this will clear

    all user programing functions including memory locations and solve many

    units problems.  Press CLR 0 0 CLR.



2.  Turn power off then on again.



3.  Within ten seconds:



         On 610 & 620 - press FCN & RCL keys together, release.

         On 630 & 700 - press MENU & RCL keys together, release.

         On ACC91 - press any two keys together, release.



         Enter: 0008693427.



4.  Phone will display software version and hex ESN, press CLR briefly

    to proceed.



5.  Phone will display "Press 0 - 9".  Enter a step number or use volume

    UP to scroll to step 0 below.



6.  To store data press STO (630 & 700), * (610 & 620) or NEW CALL (ACC91).



7.  Volume up scrolls down, volume down scrolls up through steps.



8.  Hold CLR to exit programing, pressing * after entering step 9 will

    switch to NAM 2 data.





PROGRAMING DATA:



STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION



0       Press 0 to initialize unit if not done in step 1 above.

1       10 DIGITS            PHon           MIN (AREA CODE & PHONE NUMBER)

2       5 DIGITS             Sid            SYSTEM ID

3       4 DIGITS             iPCH           IPCH AUTOMATICALLY SET

4       2 DIGITS             ACColC         ACCESS OVERLOAD

5       3 OR 4 DIGITS        LoC Cod        LOCK CODE

6       2 DIGITS             Gid            GROUP ID (10 FOR USA)

7       4 DIGITS             Stn            STATION CLASS MARK, USE 1000.

8       4 DIGITS/0 OR 1      oPc bit        OPTION BITS: (1 enables)

                                            Horn Alert

                                            Hands Free

                                            Local Use

                                            MIN Mark

9      6 DIGITS              SSSSSS         SECURITY CODE (DEFAULT IS LAST

                                            SIX DIGITS OF ESN)



At this point you can press "*" to program NAM 2 (not all models).





CHANGING LOCK CODE:



(610): F 9 2 six digit security code, new lock code, *.



(620, 630, 700):

With phone out of programing mode press MENU repeatedly

until phone displays "UNLOCK CODE SET", press RCL, enter security code to

display current lock code.  Enter new code and press STO.



LOCK:



(610):  Press LOCK.

(620, 630): F 0.

(700): MENU seven times then 0.



UNLOCK: Enter code.



SYSTEM SELECT:



(610): F 3 then 3 to scroll, * to store/exit.

(620, 630): MENU 3 then 3 to scroll, STO to store/exit.

(700): MENU ten times, RCL to scroll, STO to store, CLR to exit.