NOKIA LX11 & M11 NOTES: These are dual NAM units. The ESN prefix is 165 decimal & A5 hex. Nokia: 813-536-5553 NAM PROGRAMING: 1. Turn power on. 2. Enter * 3 0 0 1 # S S S S S SEL 9 END where SSSSS is the security code 1 2 3 4 5 is the factory default. NOTE:09/19/96 Newer phones: ##591463275 Sel 9 will show the security code to use in place of the default 12345 3. If the above was successful the phone will display "IdEnt IF InFO Pri" Skip to step 6 to program NAM 1, or complete steps 4 & 5 to switch to NAM 2. 4. Press SND and the phone will display "OPt InFO diSAbLEd" 5. Press SND and the phone will display "OPt InFO EnAbLEd" 6. Press END, the first data entry will be displayed. 7. Press END to store and increment each step. 8. The SND key toggles single digit options. 9. Press SEL CLR to exit programing having entered all steps. PROGRAMING DATA STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION 01 00000 - 32767 HO-Id SYSTEM ID 02 0 OR 1 MIN Mark MIN MARK 03 0 OR 1 LOCL OPt LOCAL USE MARK 04 10 DIGITS Phonxx MIN (AREA CODE & TEL#) 05 08 ONLY St CLASS STATION CLASS MARK 06 333 OR 334 PAging Ch INITIAL PAGING CHANNEL 07 2 DIGITS O-LOAd CLASS ACCESS OVERLOAD CLASS 08 A OR B PrEF SyS PREFERRED SYSTEM (SND TOGGLES) 09 2 DIGITS grOUP Id GROUP ID (10 IN USA) 10 5 DIGITS SECUrity SECURITY CODE 11 MM/DD/YY 1 dAtE CAN NOT BE CHANGED 12 MM/DD/YY 2 dAtE INSTALLATION DATE 13 Prog done PRESS SEL CLR TO EXIT LOCK: SEL LCK. UNLOCK: Enter four digit code. SYSTEM SELECT: SEL 1 then 1 to scroll: A = A only, b = B only, S = Pref/non pref, H = Home only.