ANTEL STR-300/330/500/550/700/770/950X NOTES: These units have two NAMS. The ESN prefix is 146 decimal, 92 hex. Antel: 516-273-8000 NAM Programing: 1. Enter 04049, FCN, FCN. 2. The phone's ESN (step 01 below) will be displayed. 3. SEND is used to store and increment the step number. If an invalid entry is made the display will not increment. 4. END is used to complete and exit programing at any time. 5. CLR is used to correct an entry. PROGRAMING DATA: STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION 01 CAN NOT BE CHANGED ESN ESN 02 3 DIGITS AREACD AREA CODE 03 7 DIGITS PHONE MIN (PHONE #) 04 00000 - 32767 SYSID SYSTEM ID 05 0 OR 1 LOCAL LOCAL USE 06 0 OR 1 MINMARK MIN MARK 07 0333 or 0334 IPCH INITIAL PAGING CHANNEL 08 00 TO 15 ACCOLC ACCESS OVERLOAD 09 0 OR 1 PRESYS PREFERRED SYSTEM 10 00 TO 15 GROUP GROUP ID (10 FOR USA) 11 4 DIGITS SEC CODE SECURITY CODE 12 0 OR 1 HANDFREE 1 = YES, 0 = NO 13 0 OR 1 HORNALRT 1 = YES, 0 = NO 14 0 OR 1 AUTONREG SEE NOTE 1 15 0 OR 1 WHERE SEE NOTE 2 16 0 OR 1 BEEP 1 = 60 SEC BEEP, 0 = NO BEEP 17 0 OR 1 CTONE CONTINUOUS DTMF 18 0 OR 1 DUAL NAM DUAL NAM If dual nam is set to 1 then step 2 thru 10 will alternate between NAM 1 and NAM 2 each time you scroll through the data. Notes: 1. A "1" enables the phone to auto register when roaming. 2. A "1" makes the phone alert all non home systems upon entry. LOCK - Press F * and hold * for two seconds. UNLOCK - CLR then three digit lock code. SYSTEM SELECT: F51 = A/B, F52 = B/A, F53 = A ONLY, F54 = B ONLY, F55 = HOME ONLY.