ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ Filename: BULBOMB.TXT ³ ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵ ³ Title: Bulb Bomb ³ ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵ ³ By: Hell's Angel ³ ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵ ³ Released: 06/17/96 ³ ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵ ³ Danger: ÛÛÛÛ°°°°°° ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; Materials: 1. A few light bulbs 2. Torch (one that will melt glass, radio shack single cylinder model.) 3. Gasoline 4. Liquid soap 5. Epoxy glue 1. Make a hole in the light bulb about half an inch below the metal part. (don't make it on the bottom, because if the seal you will make should break, the person/room you wanted to eliminate will notice the hole (the gasoline will drip on the floor.) 2. Now, carefully fill the light bulb about half full with gas, then the rest with soap (hold at an angle if you have to.) Now, use the epoxy glue and glue the hole. 3. Thirdly, take the epoxy glue and glue over the hole. 4. Finally, find a light socket and screw the bulb in. Make sure the light is off. If it is on, then, I will send flowers. Don't test it, unless you are committing suicide. --hack