=========================================================================== = [JAN.29 1992] [JAN.29 1992] = = = = = = ___ ___ = = ___ / / ___ / / = = / /_/ /__________ / /__/ /___ ________ ___ = = / / \ __/ / / / // // \ \ / _ \ = = / __ / /\ \ \ ______ / // // /\_/___/ / / \ \ = = / / / / /_/ / / /_____/ / // // / / __/ / /__/ / = = / / /__/ \_____/__/ / __/___//__//__/ /_____//______/ = = /__/ /__/ = = = = P R E S E N T S : = = ===================== = = = = T H E B A D B O O K O F B O M B S = = = = TyPeD By: SINISTER/H.W. = = = = = = = =========================================================================== =========================================================================== = =+=+=+=+==+=+=+= = = =! DESCLAIMER != = = =+=+=+=+==+=+=+= = = = = First Let It Be Known That HOT-WIRED Or Any Member Of H.W. Takes = = ABSOLUTELY No Responcibility For The Information Provided In This File. = = These Experiments Are Not To Be Performed In Any Way,And Is Supplied = = Solely For Study And Information Purposes Only! = = If You Decide To Ignore This Warning And Choose To Perform Some Or Any = = Of These Experiments;You May Be Breaking The Law,As Well As Injuring = = Or Endangering Your Life And The Lives Of Others! = =========================================================================== -=-=-=-=-=-=-=-=-=- [1.0] -TABLE OF CONTENTS- -=-=-=-=-=-=-=-=-=- :SeCtIoN: :FiLe NaMeS: --------------------------------------------------------------------------- --------------------------------------------------------------------------- [1.0].............................TABLE OF CONTENTS [1.1].............................SLOW BURNING FUSES [1.2].............................FAST BURNING FUSES [1.3].............................UNDER WATER IGNITERS [1.4].............................DRIED SEED TIMER [1.5].............................IGNITER FROM BOOK MATCHES [1.6].............................LIGHTBULB BOMB [1.7].............................TRAP LIGHT BULB BOMB [1.8].............................GERBIL FEED BOMB [1.9].............................PIPEBOMBS [2.0].............................PIPEBOMBS II [2.1].............................PIPEBOMBS III [2.2].............................PIPE HAND GRENADE [2.3].............................AIROSOL CAN BOMB [2.4].............................FERTILIZER EXPLOSIVE [2.5].............................FERTILIZER EXPLOSIVE II [2.6].............................SODIUM CHLORATE AND SUGAR EXPLOSIVE [2.7].............................SOLIDOX BOMB [2.8].............................Co2 BOMB [2.9].............................PRESSURE EXPLOSIVE [3.0].............................LIGHTER BOMB [3.1].............................TENNIS BALL BOMB [3.2].............................CHEMICAL FIRE BOTTLE BOMB [3.3].............................FIREY EXPLOSIVE PEN [3.4].............................MERCURY BATTERY BOMB [3.5].............................ACETYLENE BALLOON BOMB [3.6].............................HIDENBURGE BOMB [3.7].............................CARBIDE BOMB [3.8].............................NITRO BOMB [3.9].............................JUG BAND BOMB [4.0].............................MINI GRENADE [4.1].............................NAIL GRENADE [4.2].............................NITROMETHANE BOMB [4.3].............................CIGARETTE LOAD BOMB [4.4].............................CARBON-TET-EXPLOSIVE [4.5].............................MILK CARTON BOMB [4.6].............................PISS BOMB [4.7].............................TNT [4.8].............................FIRECRACKERS [4.9].............................BOOK BOMB [5.0].............................DYNAMITE [5.1].............................CHEMICAL EQUIVALENCY LIST [1.1] -[SLOW BURNING FUSES]- ------------------------------- [2 Inches Per Minute] :MATERIALS: ============= -> Cotton String Or 3 Shoelaces -> Potassium Nitrate Or Patassium Chlorate -> Granulated Sugar :PROCEDURE: ============= -> Wash The Cotton String Or Shoelaces In HOT Soapy Water,Then Rinse With Fresh Water. -> Mix The Following Together In A Glass Bowl: -1 Part Potassium Nitrate Or Patassium Chlorate. -1 Part Granulated Sugar. -2 Parts Hot Water. -> Soak The Cotton Strings Or Shoelaces In The Above Solution. -> Twist Or Braid 3 Strands Together And Allow Them To Dry. -> Then Check The Burn Rate To See Long It Actually Takes. [1.2] -[FAST BURNING FUSES]- ------------------------------- [40 Inches Per Minute] :MATERIALS: ============= -> Soft Cotton String -> Fine Black Powder -> Shallow Dish Or Pan :PROCEDURE: ============= -> Moisten Powder To A Paste. -> Twist Or Braid 3 Strands Of Cotton Together. -> Rub Paste Into String And Allow It To Dry. -> Once Again,Check The Burn Rate. [1.3] -[UNDER WATER IGNITERS]- --------------------------------- :MATERIALS: ============= -> Pack Of 10 Silicon Diodes (Available At Any Radio Shack.) Note:They are very small glass objects. -> Pack Of Matches -> 1 Candle :PROCEDURE: ============= -> Light The Candle And Allow A Pool Of Molten Wax To Form At The Top. -> Take A Single Match And Hold The Glass Part Of The Single Diode Against The Head. -> Bend The Diode Pins Around The Matchhead So That One Wraps In An Upward Direction And Then Sticks Out To The Side. -> Do The Same With The Other Wire,But In A Downward Direction. The Diodes Should Now Be Hugging The Matchhead,But It's Wires MUST NOT TOUCH EACH OTHER! -> Dip The Matchhead In Wax To Give It A Water-Proof Coat. These Now Work Underwater. -> Repeat To Make As Many As You Want. :HOW TO USE THEM: =================== -> When They Are Hooked Accross A 6v Battery, The Diode Reaches What Is Called Breakdown Voltage,They Usually Produce Great Ammounts Of Heat And Light,While Quickly Melting Into A Little Blob. This Heat Is Enough To Ignite The Matchhead. [1.4] -[DRIED SEED TIMER]- ----------------------------- A Time Delay Device For Electrical Firing Circuits Can Be Made Using The Principle Of Expansion Of Dried Seeds. :MATERIALS: ============= -> Dried Peas,Beans Or Any Other Dehydrated Seeds. -> Wide-Mouth Glass Jar With Non-Metal Cap. -> Two Screws Or Bolts. -> Thin Metal Plate. -> Hand Drill. -> Screwdriver :PROCEDURE: ============= -> Determine The Rate Of The Rise Of The Dried Seeds Selected. This Is Necessary To Determine The Delay Time Of The Timer. -> Place A Sample Of The Dried Seeds In The Jar And Cover It With Water. -> Measure The Time It Takes For The Seeds To Rise A Given Height. Most Dried Seeds Increase 50% I One Or Two Hours. -> Cut A Disc From Thin Metal Plate. Disc Should Fit Loosely Inside The Jar. -> NOTE: If The Metal Is Painted,Rusty Or Otherwise Coated,It Must Be Scraped Or Sanded Off,To Obtain A Clean Metal Surface. -> Drill Two Holes In The Cap Of The Jar,About 2 Inches Apart,The Diameter Of Holes Should Be Such That Screws Or Bolts Will Thread Tighly Into Them. If The Jar Has A Metal Cap Or No Cap,A Piece Of Wood Of Plastic (Not Metal) Can Be Used As A Cover. -> Turn The Two Screws Or Bolts Through The Holes In The Cap. Bolts Should Extend About One In. (2 1/2 cm) Into The Jar. -> IMPORTANT: Both Bolts Must Extend The Same Distance Below The Container Cover. -> Pour The Dried Seeds Into The Container. The Level Will Depend Upon The Previously Measured Rise Time And The Desired Delay. -> Place The Metal Disc In The Jar On Top Of the Seeds. :HOW TO USE: ============== -> Add Just Enough Water To Completely Cover The Seeds And Place The Cap On The Jar -> Attach Connecting Wires From The Firing Circuit To The Two Screws On the Cap. -> Expansion Of The Seeds Will Raise The Metal Disc Until It Contacts The Screws And Closes The Circuit. [1.5] -[IGNITER FROM BOOK MATCHES]- -------------------------------------- This Is A Hot Igniter Made From Paper Book Matches,For Use of Molotov Cocktail And Other Incendiaries. :MATERIALS: ============= -> Paper Book Matches. -> Adhesive Or Friction Tape. :PROCEDURE: ============= -> Remove The Staples From The Match Book,And Separate Matches From Cover. -> Fold And Tape One Row Of Matches. (Fold In Thirds) -> Shape The Cover Into A Tube With Striking Surface On The Inside Of The Taped Match Heads. Leave Cover Open At Opposite End For Insertion Of The Matches. -> Push The Taped Matches Into The Tube Until The Bottom Ends Are Exposed About 3/4 In. (2 cm) -> Flatten And Fold The Open End Of The Tube So That It Laps Over About 1 in. (2-1/2 cm);Tape In Place. :USE WITH A MOLOTOV COCKTAIL: =============================== -> Tape The Match End Tab Of The Igniter To The Neck of The Molotov Cocktail. -> Grasp The Cover And Tab And Pull Sharply Or Quickly To Ignite. :GENERAL USE: =============== -> The Book Match Igniter Can Be Used By Itself To Ignite Flammable Liquids Fuse Cords, And Similar Items Requiring Hot Ignition. -> CAUTION: Store Matches And Completed Igniters In MoistureProof Containers, Such As Rubber Or Plastic Bags Until ready For Use. Damp Or Wet Paper Book Matches Will Not Ignite. -=-=-=--=-=-=-=- [1.6] -LIGHTBULB BOMB- -=-=-=--=-=-=-=- :MATERIALS: ============= -> 100 Watt Light Bulb. -> 50 ml Of Unleaded Gasoline. -> Power Drill -> Very Small Drill Bit. -> Hypdermic Needle (un-used) -> Soldering Iron And Solder. :PROCEDURE: ============= -> Take Your Light Bulb And Look At The Part That Screws Into The Socket. -> Find The Little Blob Of Solder On The Bottom. -> Now Grab Your Power Drill,And Drill A Tiny Little Hole Into The Bottom Of The Light Bulb Where The Solder Is. Make Sure You Don't Damage The Filliments Inside The Bulb,Or It Won't Work! -> Take Your Hypo And Fill It With The Gas. Insert It Into The Little Hole In The Light Bulb And Continue This Until The Bulb Is Completely Full Of Gas. (Should Weigh About 1 Pound.) -> Wipe Off The Bulb Really Good,And Set It Somewhere To Dry The Outside In Case Some Was Spilled. -> After It Is Dry, (This Is The Dangerous Part) Take Your Soldering Iron And Hold It Above The Hole In The Light Bulb. -> Touch A Lenth Of Solder To The Iron And Let One Small Drop Fall Onto The Hole, Sealing It Up. :USE: ======= -> Now Just Switch the Bulb With Your Enemies. One Of Them..Or All! -> Leave His/Her Place, And Let Time Take It's Place. -> NOTE: This Bomb Works With Either Upside Down Fixtures Such As Ceiling Lights, Or In The Upright Position, Such As Table Lamps Or Fixtures With The Socket At The Bottom. :CONCLUSION: ============== -> When The Light Switch Is Flipped, The Electricity Flowing Through The Bulb's Filaments Shorts Out And Sparks, Therefor Causing A Minor Explosion. If You're Lucky, the Guy Is Standing Close To The Light And Gets Shards Of Glass, Splashes Of Gas, And Fire In His Face. Maybe.... ...Just Maybe, It Might Burn Down His House! -> Hopefully He/She Doesn't Have A "CLAP ON...CLAP OFF" Switch! heh...Cause You'll Probely Miss Your Enemy All Together! -=-=-=-=-=-=-=-=-=-=-=- [1.7] -TRAP LIGHT BULB BOMBS- -=-=-=-=-=-=-=-=-=-=-=- This Is Basically The Same As The Light Bulb Bomb Above, Except A Couple Diffrent Things. Might As Well, Include Both. Choose For Yourself Which One Is Better? "I'd Go With The First One." :MATERIALS: ============= -> 100 Watt Lighbulb. -> A Small, But Powerful Torch. -> 25 ml Of Gasoline. -> A Tube Of Epoxy Glue. -> Liquid Soap. :PROCEDURE: ============= -> Place A Hole In The Lightbulb. (See Below) * --- [ ] [ ] *[ ]* [ ] [ ] [ ] [---] -> *- Mark Where Hole May Be Placed. -> Carefully Poor Some Gasoline Through The Hole. (1/2 Of The Bulb) -> Then Pour Some Liquid Soap In The Hole. (1/2 Of The Bulb) -> Cover The Hole With Your Epoxy Glue And Let Dry. -> Make Sure The Switch Is Off, And Screw In The Light Bulb (DUH!) -=-=-=-==-=-=-=-=- [1.8] -GERBIL FEED BOMB- -=-=-=-==-=-=-=-=- :MATERIALS: ============= -> Some Gerbil Feed/Food. Or Some Other Type Of Small Rodent Food. -> Hammer. -> Some Kind Of Bag, Plastic, Paper...ect. -> Model Glue. -> Glass Jar. (Peanut Butter Or Jam Jar) -> Gasoline. -> A Fuse. (Your Choice!) :PROCEDURE: ============= -> Get Some Gerbil feed, Or Some Other Type Of Rodent Food. -> Mash Up The Food Pellets Into Fine Powder. (About The Consistancy Of Beach Sand). The Best Way To Do This Is Put The Gerbil Food In A Bag, And Smash It,Until It's Made Into Fine Powder. -> Put The Powder Into A Jar. -> Squirt The Model Glue Evenly Over All Your Fingers,And Stick Your Hand. Into The Jar. -> Move Your Hand Around,Until The Glue Is Well Mixed With the Powder. -> Fill The Rest Of The Jar With Gasoline. -> Put A Long Fuse Into The Jar, Or Just Drop A Match Into It. -> Last Of All.....Light The Fuse Of Course! -=-=-=-=-=- [1.9] -PIPEBOMBS- -=-=-=-=-=- :MATERIALS: ============= -> 8 Inch Section Of PVC Conduit. 1" In Diameter. -> 2 Pipe Caps. (That Will Fit The PVC) -> Some Sort Of Propellant. -> Water-Proof Fuse. -> Tube Of Forma-Gasket, Or Some Other Sealant. -> Hot Glue Gun. -> Power Drill. -> Small Drill Bit. :PROCEDURE: ============= -> Put One Of The Caps On The PVC,Seal It, And Let It Dry. -> Fill The Pipe Halfway Full With Your Propellant. -> Hold One End Of The Fuse While Filling The Pipe The Rest Of The Way, With the Propellant. -> The Pipe Should Now Be Full Of Propellant Up To 1/3 Inch From the Top Of The PVC. Fill It The Rest Of The Way With Hot Glue,And Let it Cool. -> Drill A Small Hole In The Remaining Pipe Cap,And Put It On The PVC. -> Make Sure You've Run The Fuse Through The Small Hole. -> Now,Seal The Cap On The Pipe, And Seal The Small Hole Around The Fuse As Well. -> You Now Have A Working Pipe Bomb,How You Use It,Is Up To You! -=-=-==-=-=-=- [2.0] -PIPEBOMBS II- -=-=-==-=-=-=- Here is Yet Another Way Of Making A Pipe Bomb. A Little Diffrent, But Having More Than One Recipe Is Better. Go With The One You Think Is More Effective,Or That You Understand Better. :MATERIALS: ============= -> Steel Pipe, Approx. 1 Foot. -> Caps To Go On The End Of The Pipe. -> BabyFood Jar. Or Something Very Similar. -> Vinegar. -> Wielder (Not Mandatory) -> Small Rocks. -> Baking Soda,Medium Size.(Arm & Hammer) :PROCEDURE: ============= -> Go To Your Local Hardware Store, And Pick Up A Piece Of Steel Pipe. Aprroximately 1 Foot. You Also Want The Ends Threaded. -> Get Caps Also, To Put At The End Of The Pipe. -> Get Ahold Of A BabyFood Jar. Make Sure The Jar Will Fit Down The Pipe Real Easy. -> Fill The Baby Jar With Everyday Venegar. Make Sure The Top Is Screwed On Really Tight. -> Cap One Of The Pipe With One Of The Caps You Picked Up. If You Know Of Someone With A Wielder, Have Him Wield A Bead Around The Threads After You Have It Capped. -> Put Some Small Rocks Down The End Of The Pipe And Then Slide The Baby Food Jar Down Inside So That The Glass End Is Against The Rocks. -> Now Empty A Medium Box Of Baking Soda Into The Pipe. -> Cap The Other End Of The Pipe,And If You Can Wield It. -> When You Go To Blow It Up,Smack the End Of The Pipe. That Sends The Jar Inside,This Breaks The Jar, The Vinegar And Baking Soda Now Mix Together And Builds Up Pressure. -> IMPORTANT: Sometimes It Takes From 1 Minute Up To 5 Minutes To Detonate. So Do Not Go Back And Get It, Until You've Waited Long Enough, And You Are Sure It's Dead. But It Should Go Of, Almost All The Time. -=-=-=-=-=-=-=- [2.1] -PIPE BOMB III- -=-=-=-=-=-=-=- :MATERIALS: ============= -> Explosive Or Propellant.(Fastest Burning Is Best) -> 3 Inch Wide And 12 Inch Long Pipe.(Plastic Or Metal) -> Fuse Or Wick. -> 2 Corks Or Caps.(For The Ends Of The Pipe) -> Power Drill. -> Small Drill Bit.(The Size Of The Fuse You're Using) :PROCEDURE: ============= -> Take Your Power Drill,And Drill A Hole In The Side Of Your Pipe. About 1-1/2 Inches Down From The End Of The Pipe. -> Cork One End Of The Pipe. Make Sure It's Tight. If Needed,Hammer It In, Until It Seems Fastened Tightly. -> Pour In Your Propellent Or Explosive, Until It Almost Reaches The Top. Make Sure You Can Still,Stick In Your Cork. -> Insert Your Fuse,And You're All Done. -> Follow The Diagram Below. ********* ********* <---> CORK ********* [OOOOOOO] [OOOOOOO] [OOOOOOO] <---> EXPLOSIVE OR [OOOOOOO] PROPELLENT [OOOOOOO] [OOOOOO--------+ <---> FUSE [OOOOOOO] \ [OOOOOOO] \_____ <---> HOLE [OOOOOOO] [OOOOOOO] [OOOOOOO] ********* ********* <---> CORK ********* -=-=-=-=-=-=-=-=-=- [2.2] -PIPE HAND GRENADE- -=-=-=-=-=-=-=-=-=- :MATERIALS: ============= -> Iron/Steel Pipe. Threaded Ends, 1-1/2" To 3" Diameter, 3" To 8" Long. -> 2 Iron Pipe Caps. -> Explosive Or Propellant. -> Commercial or Military Blasting Caps. (Not Electric) -> Fuse Cord. -> Power Drill. -> Pliers. :PROCEDURE: ============= -> Place Blasting Cap On One End Of The Fuse Cord,And Crimp It With Pliers. -> NOTE: To Find Out How Long The Fuse Cord Should be, Check The Time It Takes A Known Lenth To Burn. If 12 Inches Burns In 30 Seconds, Then A 6 Inch Cord Will Ignite The Grenade In 15 Seconds. -> Screw Pipe Cap To One End Of the Pipe. Place Fuse Cord With Blasting Cap Into The Opposite End So That The Blasting Cap Is near The Center Of The Pipe. -> NOTE II: If Plastic Explosive Is To Be Used,Fill Pipe BEFORE Inserting The Blasting Cap. Push A Round Stick Into The Center Of The Explosive To To Make A Hole, And Then Insert The Blasting Cap. -> Pour Explosives Or Propellent Into The Pipe A Little At A Time. Tap The Base Of The Pipe Frequently To Settle Filler. -> Drill A Hole In The Center Of The Unassembled Pipe Caplarge,Enough For The Fuse Cord To Pass Through. -> Wipe Pipe Threads To Remove Any Filler Material. Slide The Drilled Pipe Cap Over The Fuse And Screw Handtight Onto The Pipe. -> Now You're Ready To Go! -=-=-=-==-=-=-=-=- [2.3] -AIROSOL CAN BOMB- -=-=-=-==-=-=-=-=- :MATERIALS: ============= -> Airosol Can. -> Low Order Explosives Or Propellent. -> Hack Saw or Can Opener. -> Long Wick Or Fuse. -> Epoxy Glue. -> Laquer (Optional) -> Shrapnel (Optional) :PROCEDURE: ============= -> Remove Plastic Sprayer From Can,And Open The Can Up With The Saw Or Can Opener. -> Let The Gas Escape. -> Pour The Explosives Or Propellent Into The Can. -> Add Shrapnel To Enlarge The Hole. If You Do, Just Get A Nail And Force It in, And Epoxy The Can Closed. -> You May Want To Coat It With Laquer Which Causes A Loud Explosion. -=-=-=-=-=-=-=-=-=-=-=- [2.4] -FERTILIZER EXPLOSIVES- -=-=-=-=-=-=-=-=-=-=-=- :MATERIALS: ============= -> Fertilizer - Containing No Less Than 32% Total Nitrogen. -> A 1:1 Mixture Of Oil And Gasoline. -> 16 oz Glass Bottle. :PROCEDURE: ============= -> Crush The Fertilizer Into A Flour Like Substance. -> Mix 32 Parts Fertilizer To 1 Part Oil/Gas Mixture While Stiring Vigoursly. -> Spoon Mixture Into 16 oz Glass Bottle. -> Insert Blasting Cap,Just Below The Surface Of The Fertilizer Explosive. -> Ignite When Ready. -=-=-=-=-=-=-=-=-=-=-=-=- [2.5] -FERTILIZER EXPLOSIVE II- -=-=-=-=-=-=-=-=-=-=-=-=- :MATERIALS: ============= -> Fertilizer With No Less Than 32% Total Nitrogen. -> Fine Aluminum Bronzing Powder. (Available At Paint Stores) -> 16 oz Glass Bottle. :PROCEDURE: ============= -> Grind The Fertilizer Into A Fine Flour Like Substance. -> Mix 4 Parts Fertilizer To 1 Part Bronzing Powder. -> Spoon Mixture Into Glass Bottle. -> Insert Blasting Cap,Just Below The Surface Of The Fertilizer Explosive. -> Store In An Air-Tight Container Untile Ready To Use. -> Ignite When Ready. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- [2.6] -SODIUM CHLORATE & SUGAR EXPLOSIVE- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- :MATERIALS: ============= -> Sodium Chlorate -> Granular Sugar -> Steel Pipe, Threaded At One End. -> 1 End Cap. (To Fit At The End Of The Pipe) :PROCEDURE: ============= -> Mix 3 Parts Sodium Chlorate To 2 Parts Sugar. -> Screw On The End Cap Onto One Of The Threaded Ends. -> Pour The Mixyure Into The Pipe. -> Insert The Blasting Cap,Just Below The Surface Of The Fertilizer Explosive. -> Ignite When Ready. -=-=-=-=-=-=-=- [2.7] -SOLIDOX BOMBS- -=-=-=-=-=-=-=- Solidox Comes In An Aluminum Can Containing 6 Grey Sticks. This Can Be Bought At Almost Any Hardware Store. Solidox Is Used In Wielding Applications As An Oxidizing Agent For The Hot Flame Needed To Melt The Metal. The Most Active Ingrediant In Solidox Is Potassium Chlorate,A Filler Used In Many Military Applications In The WWII Era. Since Solidox Is Literally What The Name Says: SOLID OXygen, You Must Have An Energy Source For An Explosion. The Most Common And Readily Available Energy Source Is Common Household Sugar,Or Sucrose. In Theory,Glucose Would Be The Purest Energy Source, But It Is Hard To Find A Solid Supply Of It. :MATERIALS: ============= -> 6 Sticks Of SOLIDOX (Comes All In One Pack) -> Mortar Or Pestle -> Balance :PROCEDURE: ============= -> Open The Can Of Solidox, And Remove All 6 Sticks. -> One By One, Gring Each Of Them Up.(Preferably With A Mortar Or Pestle) Into The Finest Powder Possible. -> The Ratio For Mixing The Sugar With The Solidox Is 1:1, So Weigh The Solidox Powder,And Grind Up The Equivalent Amount Of Sugar. -> Mix Equivalent Amounts Of Solidox Powder,And Sugar In A 1:1 Ratio. -> You Now Have An Extremely Powerful Substance That Can Be Used In A Variety Of Applications. -=-=-=-=-=- [2.8] -Co2 BOMBS- -=-=-=-=-=- :MATERIALS: ============= -> Co2 Cartrage (Must Be Used Up) -> Black Powder -> A Nail -> Fuse :PROCEDURE: ============= -> First You Need A Co2 Cartrage That Is Used Up. -> With A Nail,Force A Hole Bigger Than It Already Is, To Allow The Black Powder And Your Wick To Fit In Easily. -> Fill The Cartrige With Black Powder,And Pack It Really Well. (Try Taping It On A Hard Surface) -> Insert Your Fuse. (Water-Proof Fuse Works Best.) -> And You're All Ready To Go! -=-=-=-=-==-=-=-=-=- [2.9] -PRESSURE EXPLOSIVE- -=-=-=-=-==-=-=-=-=- Pressure Makes A Neat Explosion If It Is Done Right! :MATERIALS: ============= -> Large 750ml Pop Bottle.(Bigger The Better!) -> 200gm's Of Baking Soda. -> Vinegar :PROCEDURE: ============= -> Get Your 750ml Pop Bottle, Or Any Other Size,And Fill It Up Halfway With Vinegar. -> Then Pour About 200gm's Of Baking Soda In The Bottle And CAP it! -> Put It Down And Run. -> It Should Blow Up From The Pressure Built Up. -> This Is What You Call A "Sissy Bomb." -=-=-==-=-=-=- [3.0] -LIGHTER BOMB- -=-=-==-=-=-=- :MATERIALS: ============= -> 4 Lighters. -> Lighter Fluid, Or Solvent. -> Scotch Tape,Or Any Other Kind Will Do. :PROCEDURE: ============= -> Take Your 4 Lighters,Combine Them Side By Side. -> Then Tape Them All Together. -> Squirt Lighter Fluid Or Your Solvent All Over Them. -> When Ready Light It,And Stand Back. -> This May Or May Not Work. A Few Things Could Happen. -> But I'll Let You Find Out For Your Self! -=-=-=-==-=-=-=-=- [3.1] -TENNIS BALL BOMB- -=-=-=-==-=-=-=-=- :MATERIALS: ============= -> Tennis Ball. -> Fast Burning Powder. -> Major Amounts Of Match Heads. -> Knife Or A Power Drill. -> Some Kind Of Sealent. :PROCEDURE: ============= -> Take Your Tennis Ball And Drill Or Cut A Fairly Big Size Hole Into It. This Is To Fit The Match Heads And The Powder In The Ball. -> Mix Your Powder And The Match Heads Together. -> Put Your Mixture Into The Ball,Until The Ball Is Holding All It Can Hold. You Want It Packed Very Tightly. So Fit As Much In As Possible! -> When Done,Seal The Hole With Your Sealent. -> Wait For The Sealent To Dry. -> Throw The Ball As Hard As You Can Against A Hard Surface. -=-=-=-=-=-=-=-=-=-=-=-=-=- [3.2] -CHEMICAL FIRE BOTTLE BOMB- -=-=-=-=-=-=-=-=-=-=-=-=-=- :MATERIALS: ============= -> Sulphuric Acid.(Battery Acid) -> Gasoline. -> Potassium Chlorate. -> Sugar. -> Glass Bottle w/Stopper (Roughly 1 Quart Size) -> Small Bottle Or Jar w/Lid. -> Rag Or Absorbant Paper.(Newspaper,Paper Towels,ect) -> String Or Rubber Bands. :PROCEDURE: ============= -> Sulphuric Acid Must Be Concentrated. If Battery Acid Or Any Other Dilute Acid Is Used,Concentrate It By Boiling Until Dense White Fumes Are Given Off. Container Should Be Of Eenamelware Or Oven Glass. -> CAUTION: Sulphuric Acid Will Burn Skin And Destroy Clothing. If Any Is Spilled,Wash It Away With A Large Quantity Of Water. Fumes Are Also Dangerous And Should Not Be Inhaled. -> Remove The Acid From Heat And Allow It To Cool To Room Temparature. -> Pour Gasoline Into The Large (1 Quart) Bottle Until it Is Approximately 2/3's Full. -> Add Concentrated Sulphuric Acid To The Gasoline Slowly Until The Bottle Is Filled To Within 1" To 2" From The Top. -> Place The Stopper On The Bottle. -> Wash The Outside Of The Bottle Throughly With Clear Water. -> CAUTION: If This Is Not Done,The Fire Bottle Bomb May Be Dangerous To Handle During Use. -> Wrap A Clean Cloth Or Several Sheets Of Paper Towel Around The Outside Of The Bottle. Tie With String Or Fasten With Rubber Bands. -> Dissolve 1/2 Cup (100 gm) Of Potassium Chlorate And 1/2 Cup Of Sugar In One Cup (250 cc) Of Boiling Water. -> Allow The Solution To Cool,Pour Into The Small Bottle And Cap Tightly. The Cooled Solution Should Be Approx. 2/3 Crystals and 1/3 Liquid. If There Is More Liquid Than This,Pour Off Excess Before Using. -> CAUTION: Store This Bottle Separately From The Other Bottle. :HOW TO USE: ============== -> Shake The Small Bottle To Mix Contents And Pour Onto The Cloth Or Paper Around The Large Bottle. -> The Bottle Can Be Used Wet Or After The Solution Has Dried. However,When Dry,The Sugar - Potassium Chlorate Mixture Is Very Sensitive To Sparks Or Flame And Should Be Used Accordingly. -> Throw Or Launch The Bottle. When The Bottle Breaks Against A Hard Surface,The Fuel Will Ignite. -=-=-=-=-=-=-=-=-=-=- [3.3] -FIREY EXPLOSIVE PEN- -=-=-=-=-=-=-=-=-=-=- :MATERIALS: ============= -> Ball Point "Click" Pen. -> Gun Powder. -> Match Stick. -> Little Sheet Of Sand Paper (1 1/2" x 2) :PROCEDURE: ============= -> Unscrew The Pen And Remove All Parts Except Leave The Button At The Top Of The Pen. -> Stick The Match Stick Up Towards The Clicker, The Match Head Is Facing Downwards, Toward The Bottom Of The Pen. -> Roll The Sand Paper Up And Put It Around The Match Head. -> Put A Small Piece Of Paper Or Something At The End Of The Pen, To Block Any Of The Gun Powder From Leaking Out. -> Fill The End Piece Of The Pen With Gun Powder. -> Your Finished Product Should Look Like This. MATCH & SAND PAPER SMALL PAPER CLOG : \ GUN : \ POWDER! : \ _______:___________:_______ <_________________|_________|==: END TOP PIECE PIECE -=-=-=-=-==-=-=-=-=-=- [3.4] -MERCURY BATTERY BOMB- -=-=-=-=-==-=-=-=-=-=- :MATERIALS: ============= -> Mercury Battery.(1.5 or 1.4 V) -> Working Lamp With On/Off Switch. :PROCEDURE: ============= -> Check To See If Your Lamp Is Working. -> If So,Leave The Switch On,And Unplug The Lamp. -> Unscrew The Bulb. -> Place The Mercury Battery In The Socket And Make Sure That It Is Touching The Hot-Spot Contact. -> Move Away Any Objects Or Furniture. Or Even Better, Who Cares! Try It At A Friends Place. -> Now Stand Back And Plu The Cord Back in. -> Now Who In There Right Minds Would Try This At Home? -=-=-=-=-=-==-=-=-=-=-=- [3.5] -ACETYLENE BALLOON BOMB- -=-=-=-=-=-==-=-=-=-=-=- :MATERIALS: ============= -> Large Balloon. -> Acetylene -> Oxygen :PROCEDURE: ============= -> Get Your Large Balloon. -> Fill It Up With 50% Of Acetylene And 50% Of Oxygen.(Propane Will Work, But It Has A Less Of A Boom) -> Knot The End Of The Balloon And Tie A Fuse Of Some Sort To The Knotted End. -> Light The Fuse, And Get Away! -> NOTE: Do Not Use Any Sort Of Gasoline Fuse.(Gasoline Soaked String) Since It'll Melt The Balloon. -=-=-=-=-=-=-=-=- [3.6] -HINDENBURG BOMB- -=-=-=-=-=-=-=-=- This Bomb,Is Alot Like The Above,THE ACETYLENE BALLOON BOMB. Just A Few Diffent Methods Of Making It. :METERIALS: ============= -> Baloon. -> Bottle. -> Liquid Plumber. -> Piece Of Aluminum Foil. -> A Long Fuse. :PROCEDURE: ============= -> Fill The Bottle 3/4 Full With Liquid Plumber And Add A Little Piece Of Aluminum Foil To It. -> Put The Balloon Over The Neck Of The Bottle,Until The Balloon Is Full Of The Resulting Gas. This Is Highly Flammable Hydrogen. -> Now,Tie A Knot In The Balloon. -> Light The Fuse,And Let It Rise. -=-=-==-=-=-=- [3.7] -CARBIDE BOMB- -=-=-==-=-=-=- :MATERIALS: ============= -> Cacium Carbide. -> Tin Coke Can. -> Rubber Cement. -> Water. -> Medium Sized test Tube.(That Will Fit In The Can) -> Cork(Wider Than The Mouth Of The Can) -> Sharp Knife. :PROCEDURE: ============= -> Put The Calcium Carbide In The Tin Coke Can,Filling It 1/4 Of the Way. -> Now Fill The Test Tube With Water And Place It Inside Of The Can. -> Take The Cork And Fit It In The Test Tube. -> Use The Knife To Wittle It Down To Size. -> Once The Cork Is In Place.Seal The Top Of The Can With Ruber Cement. -> To Ignite This Bomb,All You Have To Do Is Throw It. When The Test Tube Breaks,A Very Big Boom Will Be Formed. -=-=-==-=-=- [3.8] -NITRO BOMB- -=-=-==-=-=- :MATERIALS: ============= -> Nitric Acid. -> Glycerin. -> Sulfuric Acid. :PROCEDURE: ============= -> Make The Following Solution. -> 65% Nitric Acid. -> 20% Glycerin. -> 15% Sulfuric Acid. -> This Should Explode By Heat,Impact,Or By Fuse. -=-=-=-=-=-=-=- [3.9] -JUG BAND BOMB- -=-=-=-=-=-=-=- :MATERIALS: ============= -> Glass Jug About 1 Gallon. -> Gasoline. -> Potassium Permanganate. :PROCEDURE: ============= -> First,Make Sure The Jug Is Absolutely Dry, And Also Clean. -> Now, Take A Few Drops of Gasoline And Put It In The Jug. Swish It Around,Until All The Areas Of The Jug Have Been Coated. -> If There Is Any Excess Gasoline,Which There Shouldn't Be,Get Rid Of It. -> Do The Same With The Potassium Permanganate In The Same Jug. -> Now Cap Or Cork The Jug,And Through It Forcibly Against A Hard Surface. Any Surface Will Do, As Long As The Bottle Will Break. -=-=-==-=-=-=- [4.0] -MINI GRENADE- -=-=-==-=-=-=- :MATERIALS: ============= -> 2 Bolts. -> 1 Nut. -> 4 Packs Matches. :PROCEDURE: ============= -> Scrape The Tips Off The Matches. -> Screw The Nut Onto The First Bolt. Less Than Half Way,So That There Is Space To Put The Matches In. -> Place The Match Tips In The Space That You Made. -> Now Screw The Second Bolt Onto The Nut,Now Trapping The Match Tips Between Both Bolts. -> The Device Explodes On Impact,With A Small Explosion. -=-=-==-=-=-=- [4.1] -NAIL GRENADE- -=-=-==-=-=-=- :MATERIALS: ============= -> Block Of TNT Or Other Explosive. -> Nails. -> Non-Electric Blasting Cap.(Military Or Improvised) -> Fuse Cord. -> Tape,Or String,Wire,Or Glue. :PROCEDURE: ============= -> If An Explosive Other Than TNT Is Used. Make A Hole In The Center Of The Charge For Inserting The Blasting Cap. -> TNT Can Be Drilled With Relative Safety. -> With Plastic Explosives,A Hole Can Be Made By Pressing A Round Stick Or Object Into The Center Of The Charge. -> The Hole Should Be Deep Enough That The Blasting Cap Is Totally Within The Explosive. -> Tape,Tie Or Glue One Or Two Rows Of Closely Packed Nails To The Side Of The Explosive Block. -> Nails Should Completely Cover The Four Surfaces Of The Block. -> Place The Blasting Cap On One End Of The Fuse Cord And Crimp With Pliers -> Insert The Blasting Cap In The Hole In The Block Of Explosive. -> Tape, Or Tie Fuse Cord Securely In Place So That It Will Not Fall Out When The Grenade Is Thrown. -> NOTE: To Find Out How Long The Fuse Should Be,Check The Time It Takes A Known Lenth To Burn. -> If 12 Inches (30 cm) Burns In 30 Seconds,A 10 Second Delay Will Require A 4 Inch (10 cm) Fuse. :ALTERNATE USE: ================= -> An Effective Directional Anti-Personnel Mine Can Be Made By Placing Nails On Only One Side Of The Explosive Block. -> For This Case,An Electric Blasting Cap May Be Used. -=-=-=-=-=-=-=-=-=- [4.2] -NITROMETHANE BOMB- -=-=-=-=-=-=-=-=-=- :MATERIALS: ============= -> Nitromethane. -> Ammonia.(Non Detergent) -> Blasting Cap Or Compound Detonator. :PROCEDURE: ============= -> Pour 5% Or 6% Ammonia Into The Nitromethane.(1/2 Pint Of Ammoni Will Work With One Gallon Of Nitromethane.) -> Place The Nitro Mixture Into A Bottle. -> Now Place A Cork With A Hole In It,Into The Bottle. -> Put Your Detonator In The Hole So It Touches The Mixture. -> CAUTION: This Mixture Is 22-24% More Powerful Than TNT. Use Extreme Caution. Detonate Only By Remote Control Or With A Trustworthy Timer. -> NOTE: To Increase The Power Of This Mixture,Place It In A More Confined Container.(ie. A Metal Pipe With Caps.) -=-=-=-=-=-=-=-=-=-=- [4.3] -CIGARETTE LOAD BOMB- -=-=-=-=-=-=-=-=-=-=- :MATERIALS: ============= -> Sodium Azide. -> Lead Nitrate. -> Blasa Wood Slivers.(Approx. 3/8" To 1/2" By 1/8" To 1/4") -> Filter Paper. -> Distilled Water. -> Gum Arabic Glue. :PROCEDURE: ============= -> Dissolve About 1 Gram Of Sodium Azide In Distilled Water. Don't Use More Water Than You Need. -> Then Dissolve About 3 Grams Of Lead Nitrate In Water,Again Don't Use More Than You Need. -> Slowly Pour The Lead Nitrate Solution Into The Sodium Azide Solution, Stirring As You Pour. -> A White Substance Will Settle At The Bottom. -> Pour Out The Water,And Filter The White Stuff (Lead Azide) With Distilled Water Several Times. -> Remember,The Filter Paper Has Enough Lead Azide On It To Make It Explosive. -> You Should Store What You Don't Need Wet,To Keep It From Accidently Detonating. -> Mix Enough Gum Arabic Glue To Make The Stuff Stick,Then Dip The Balsa Wood In It. -> Leave Them Dry For About A Day,Then Test One Out. -> You Should Stick It In So The End Of The Sliver Is Just Barely Visible. -> When The Cigarette Is Lit,The Paper At The End Should Be Shreadded. -> If You Put It In Right,The Victim Has Just Enough Time To Take A Drag Before It Explodes. -=-=-=-=-==-=-=-=-=-=- [4.4] -CARBON-TET EXPLOSIVE- -=-=-=-=-==-=-=-=-=-=- :MATERIALS: ============= -> Fine Aluminum Bronzing Powder. -> Carbon Tetrachloride Or Tetrachloroethylene. -> Stiring Rod.(Wood) -> Mixing Container.(Bowl,Bucket,ect) -> Measuring Container.(Cup,Tablespoon,ect) -> Storage Container.(Jar,Can,ect) -> Blasting Cap -> Pipe,Can Or Jar. :PROCEDURE: ============= -> Measure Out 2 Parts Aluminum Powder To One Part Carbon Tetrachloride Or Tetrachlorethylene Liquid Into Mixing Container,Adding Liquid To Powder While Stirring With The Wooden Rod. -> Stir Until The Mixture Becomes The Consistency Of Honey Syrup. -> CAUTION: Fumes From The Liquid Are Dangerous And Should Not Be Inhaled. -> Store Explosives In A Jar Or Similar Water Proof Container Until Ready To Use. The Liquid In The Mixture Evaporates Quickly When Not Confined. -> NOTE: Mixture Will Detonate In This Manner For A Period Of 72 Hours. :HOW TO USE: ============== -> Pour The Mixture Into An Iron Or Steel Pipe,Which Has An End Cap Threaded On One End. If A Pipe Is Not Available,You May Use A Dry Tin Can Or Glass Jar. -> Insert Blastig Cap Just Beneath The Surface Of The Explosive Mix. -> NOTE: Confining The Open End Of The Container Will Add To The Effectiveness Of The Explosive. -=-=-=-==-=-=-=-=- [4.5] -MILK CARTON BOMB- -=-=-=-==-=-=-=-=- :MATERIAL: ============ -> Plastic Milk Carton. -> Lighter Fluid. -> Piece Of Paper. -> Pair Of Chopsticks.(Or Something Similar) -> Screw Driver. :PROCEDURE: ============= -> After Aquiring All Of The Above,You Can Now Start Your Creation. -> First,Puncture A Hole At The Bottom Of The Milk Carton,With A Screw Driver,Or Equivalent. -> Next Fill One Fourth Of The Milk Carton With Lighter Fluid. -> Place The Milk Carton In A Fairly Large Area Outside. -> Hold A Piece Of Paper Between The Chopsticks And Light The Paper. -> Cautiously Place The Lighted Paper Under The Hole Of The Milk Carton. -> Back Away,And Watch! -=-=-=-=-=- [4.6] -PISS BOMB- -=-=-=-=-=- :MATERIALS: ============= -> Nitric Acid. -> Urine. -> Filtering Material. (Paper Towel That Is Finely Textured,A T-Shirt,ect) -> Aluminum Bronzing Powder. -> Heat Source. -> Measuring Containers.(Cup,Spoon) -> Water. -> Tape. -> Steel Pipe With End Caps.(One End Pre-Drilled) -> Fuse,Or Your Prefreance Of Detonators. :PROCEDURE: ============= -> Boil About 10 Cups Of Urine,To Approximately 1/10 Of It's Volume. -> Now Filter The Urine. -> Pour The Urine Into A Container Through The Filtering Material To Remove All Impurities. -> Slowly Add 1/3 Cup Of Nitric Acid To The Filtered Urine And Let It Stand For,Urea Nitrate Crystals Will Collect On The Paper. -> Wash The Urea Nitrate By Pouring Water Over It. -> Now Remove The Urea Nitrate Crystals From The Filtering Material,And Allow It To Dry Thoroughly (16 Hours). :HOW TO USE: ============== -> Spoon The Crystals Into An Iron Or Steel Pipe With An End Cap On One End. -> Thread The Fuse Through The Hole Of The Other End Cap. -> Then Screw It On. -> The Mixture Will Be More Powerful If Mixed In A 1:4 Ratio.(1 Cup Crystals.) -=-=-=- [4.7] -T'N'T- -=-=-=- :MATERIALS: ============= -> Sulfuric Acid. -> Nitric Acid. -> Toluene. -> 2 Beakers. -> Stirring Stick. -> Syringe. -> Centigrade Thermometer. -> Boiling Water. -> Cold Water. -> Ice Bath. :PROCEDURE: ============= -> Take Your 2 Beakers. -> Prepare A Solution Of 76% Sulfuric Acid, 23% Nitric Acid,And 1% Water. -> In The Other Beaker,Prepare Another Solution Of 57% Nitric Acid And 43% Sulfuric Acid.(Percentages Are On A Weight Ratio, Rather Than Volume.) -> Pour 10 Grams Of The First Solution Into An Empty Beaker And Then Blaced Into An Ice Bath. -> Then Add 10 Grams Of Toluene,And Stir For Several Minutes. -> Remove The Beaker From The Ice Bath And Gently Heat It,Until It Reaches 50 Degrees C. -> The Solution Is Being Stirred Constantly While Being Heated. -> 50 Additional Grams Of The Acid,From The First Beaker,Are Added And The Temparature Is Held For The Next 10 Minutes,And An Oily Liquid Will Begin To Form On Top Of The Acid. -> After 10 Or 12 Minutes,The Acid Solution Is Returned To The Ice Bath, And Cooled To 45 Degrees C. -> When Reaching This Temperature,The Oily Liquid Will Sink And Collect At The Bottom Of The Beaker. -> After This Point,The Remaining Acid Solution Should Be Drawn Off, By Using A Syringe. -> 50 More Grams Of The First Acid Solution Are Added To The Oily Liquid While The Temperature Is SLOWLY Being Raised To 83 Degrees C. -> After This Temperature Is Reached,It Is Maintained For A Full Half Hour. -> At The End Period,The Solution Is Allowed To Cool To 60 Degrees C. And Is Held At This Temperature For Another Full Half Hour. -> After This,The Acid Is Again Drawn Off,Leaving Once More Only Oily Liquid At The Bottom. -> 30 Grams Of Sulfuric Acid Are Added,While The Oily Liquid Is Gently Heated To 80 Degrees C. -> All Temperature Increases Must Be Accomplished Slowly And Gently! -> Once The Desired Temperature Is Reached, 30 Grams Of The Second Acid Solution Are Added,And The Temperature Is Raised From 80 Degrees C. To 104 Degrees C. And Is Held For Thress Hours. -> After The Three Hour Period Is Up,The Mixture Is Lowered To 100 Degrees C. And Held Again There For A Half Hour. -> After The Half Hour Is Up,The Oil Is Removed,From The Acid And Washed With Boiling Water. -> After The Washing With The Boiling Water,While Being Stirred Constantly, The TNT Will Begin To Solidify. -> When The Solidification Has Started,Cold Water Is Added To The Beaker,So That The TNT Will Form Into Pellets. -> Once This Is Done,You Have A Good Quality TNT. -> NOTE!: The Temparatures Used In The Preparation Of TNT Are EXACT, And Must Be Used As Such. DO NOT Estimate Or Use Approximations! Buy A Good Centigrade Thermometer. -=-=-==-=-=-=- [4.8] -FIRECRACKERS- -=-=-==-=-=-=- :MATERIALS: ============= -> Cardboard Tubing. -> Epoxy Or Other Kind Of Sealent. -> Black Powder,Or Any Other Flame Sensitive Explosive. -> Knife Or Screwdriver. -> Tissue Paper Or Pencil. -> Wax Paper. :PROCEDURE: ============= -> Cut A Small Piece Of The Cardboard Tubing,From The Tube You Are Using. Anything Less Than 4 Times The Diameter Of The Tube. -> Put The Tubing On A Piece Of Wax Paper,And Fill The Tube To A Height Of 3/4 The Diameter Of The Tubing With The Epoxy Or Other Sealent. -> Allow The Epoxy To Fully Dry. -> When It's Dry,Cut Or Make A Hole In The Middle Of The Tube With Your Screwdriver. -> Insert A Desired Lenth Of Fuse. -> Now Fill The Tube With Your Explosive,Almost To The Top. -> Pack The Explosive Tightly In The Tube With Tissue Paper,And With A Pencil,Or Anything Else Similar. -> Be Sure To Leave More Room,For The Epoxy. -> Fill The Rest Of The Tube With The Epoxy,And Allow It To Dry. -=-=-=-=-=- [4.9] -BOOK BOMB- -=-=-=-=-=- :MATERIALS: ============= -> Large Book.(Encyclopedia,Dictionary ect) -> Water Soluble Glue. -> Large Bucket. -> Boiling Water. -> Power Drill. -> Jig Saw. -> Your Bomb. -> A Vice. :PROCEDURE: ============= -> First Of All, The Book Pages Must Be All Glued Together. -> This Can Be Done By Pouring An Entire Container Of Water Soluble Glue, Into The Bucket. -> Now Filling The Bucket Wit Boiling Water. -> A Glue-Water Solution Will Be Formed,That Will Now Glue All The Pages Of The Book Together. -> After It Has Cooled Down To A Resonable Temperature, And The Solution Has Been Stirred Well,Soak The Pages Into The Solution. -> Make Sure You Don't Glue The Book Cover,Just The Pages! -> After You Have Glued All The Pages,Check To See That Every Page Has Been Properly Soaked. -> Suspend The Book,By Both Covers, And Clamp All The Pages In A Vice. -> When The Pages Are Dry,Drill A Hole In The Book Pages,With Your Hand Drill. -> After You Drilled The Hole In The Pages,Take Your Jig Saw And Cur A Big Rectangle In The Middle Of The Book,To Fit Your Bomb Into It. -> Now You Will Be Left With Just The Shell Of The Book's Pages. -> When The Pages Have Been Cut Out,The Book Should Look Like This... _______________________ | ___________________ | | | | | | | | | | | | | | | E | | | | M | | | | P | | | | T | | | | Y | | | | | | | | | | | |_________________| | |_____________________| [BOOK COVERS NOT SHOWN] -> The Book Pages Now Have To Be Securely Glued To The Back Cover. -> After Building Your Bomb,Which Is Usually Some Sort Of Timer Or Radio Controlled Bomb. -> The Bomb Is Now Placed Inside The Book. -> Whatever Type Of Bomb You Have Made,Should Be Packed With Foam,Or Such Sort,To Prevent It From Moving And Rolling Around. -> After The Timer Is Set,Or The Radio Control Has Been Turned On,The Front Cover Is Glued Closed,And The Bomb Is Taken To It's Destination. -=-=-==-=- [5.0] -DYNAMITE- -=-=-==-=- Be Sure To Mix These Very Carefully,And To Use The EXACT Ammouts Shown! These Percentages Are In Weight Ratio,Not Volume. --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNT: --------------------------------------------------------------------------- [#1] NITROGLYCERIN 32% SODIUM NITRATE 28% WOODMEAL 10% AMMONIUM OXALATE 29% GUNCOTTEN 1% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNT: --------------------------------------------------------------------------- [#2] NITROGLYCERIN 24% POTASSIUM NITRATE 9% SODIUM NITRATE 56% WOODMEAL 9% AMMONIUM OXALATE 2% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNT: --------------------------------------------------------------------------- [#3] NITROGLYCERIN 35.5% POTASSIUM NITRATE 44.5% WOODMEAL 6% GUNCOTTEN 2.5% VASELINE 5.5% POWDERED CHARCOAL 6% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#4] NITROGLYCERIN 25% POTASSIUM NITRATE 26% WOODMEAL 34% BARIUM NITRATE 5% STARCH 10% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#5] NITROGLYCERIN 57% POTASSIUM NITRATE 19% WOODMEAL 9% AMMONIUM OXALATE 12% GUNCOTTEN 3% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#6] NITROGLYCERIN 18% SODIUM NITRATE 70% WOODMEAL 5.5% POTASSIUM CHLORIDE 4.5% CHALK 2% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#7] NITROGLYCERIN 26% WOODMEAL 40% BARIUM NITRATE 32% SODIUM CARBONATE 2% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#8] NITROGLYCERIN 44% WOODMEAL 12% ANHYDROUS SODIUM SULFATE 44% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#9] NITROGLYCERIN 24% POTASSIUM NITRATE 32.5% WOODMEAL 33.5% AMMONIUM OXALATE 10% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#10] NITROGLYCERIN 26% POTASSIUM NITRATE 33% WOODMEAL 41% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#11] NITROGLYCERIN 15% SODIUM NITRATE 62.9% WOODMEAL 21.2% SODIUM CARBONATE .9% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#12] NITROGLYCERIN 35% SODIUM NITRATE 27% WOODMEAL 10% AMMONIUM OXALATE 1% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#13] NITROGLYCERIN 32% POTASSIUM NITRATE 27% WOODMEAL 10% AMMONIUM OXALATE 30% GUNCOTTON 1% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#14] NITROGLYCERIN 33% WOODMEAL 10.3% AMMONIUM OXALATE 29% GUNCOTTON .7% POTASSIUM PERCHLORIDE 27% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#15] NITROGLYCERIN 40% SODIUM NITRATE 45% WOODMEAL 15% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#16] NITROGLYCERIN 47% STARCH 50% GUNCOTTON 3% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#17] NITROGLYCERIN 30% SODIUM NITRATE 22.3% WOODMEAL 40.5% POTASSIUM CHLORIDE 7.2% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#18] NITROGLYCERIN 50% SODIUM NITRATE 32.6% WOODMEAL 17% AMMONIUM OXALATE .4% --------------------------------------------------------------------------- :NO.#: :INGREDIANTS: :AMMOUNTS: --------------------------------------------------------------------------- [#19] NITROGLYCERIN 23% POTASSIUM NITRATE 27.5% WOODMEAL 37% AMMONIUM OXALATE 8% BARIUM NITRATE 4% CALCIUM CARBONATE .5% --------------------------------------------------------------------------- -=-=-=-=-=-=-=-=-=-=-=-=-=- [5.1] -CHEMICAL EQUIVALANCY LIST- -=-=-=-=-=-=-=-=-=-=-=-=-=- :CHEMICAL: :EQUIVALENCY: --------------------------------------------------------------------------- ACACIA ......................................................... GUM ARABIC ACETIC ACID ....................................................... VINEGAR ALUMINUM OXIDE ..................................................... ALUMIA ALUMINUM POTASSIUM SULPHATE .......................................... ALUM ALUMINUM SULFATE ..................................................... ALUM AMMONIUM CARBONATE .............................................. HARTSHORN AMMONIUM HYDROXIDE ................................................ AMMONIA AMMONIUM NITRATE ............................................... SALT PETER AMMONIUM OLEATE .............................................. AMMONIA SOAP AMYLACETATE .................................................... BANANA OIL BARIUM SULFIDE .................................................. BLACK ASH CARBON CARBINATE .................................................... CHALK CARBONTETRACHLORIDE ........................................ CLEANING FLUID CALCIUM HYPOCHLORIDE ..................................... BLEACHING POWDER CALCIUM OXIDE ........................................................ LIME CALCIUM SULFATE .......................................... PLASTER OF PARIS CARBONIC ACID ..................................................... SELTZER CETYLTRIMETHYLAMMONIUMBROMIDE ............................... AMMONIUM SALT ETHYLINEDICHLORIDE ............................................ DUTCH FLUID FERIC OXIDE ..................................................... IRON RUST FURFURALDEHYDE ................................................... BRAN OIL GLUCOSE ........................................................ CORN SYRUP GRAPHITE ...................................................... PENCIL LEAD HYDROCHLORIC ACID ........................................... MURIATIC ACID HYDROGEN PEROXIDE ................................................ PEROXIDE LEAD ACETATE ................................................ SUGAR OF LEAD LEAD TERO-OXIDE .................................................. RED LEAD MAGNESIUM SILICATE ................................................... TALC MAGNESIUM SULFATE .............................................. EPSOM SALT MATHYLSALICYLATE ......................................... WINTER GREEN OIL NAPHTHALENE ..................................................... MOTHBALLS PHENOL ...................................................... CARBOLIC ACID POTASSIUM BICARBONATE ..................................... CREAM OF TARTER POTASSIUM CHROMIUM SULFATE ..................................... CHROMEALUM POTASSIUM NITRATE .............................................. SALT PETER SODIUM OXIDE ......................................................... SAND SODIUM BICARBONATE ............................................ BAKING SODA SODIUM BORATE ....................................................... BORAX SODIUM CARBONATE ............................................. WASHING SODA SODIUM CHLORIDE ...................................................... SALT SODIUM HYDROXIDE ...................................................... LYE SODIUM SILICATE ..................................................... GLASS SODIUM SULFATE ............................................. GLAUBER'S SALT SODIUM THIOSULFATE .................................... PHOTOGRAPHER'S ACID SULFURIC ACID ................................................ BATTERY ACID SUCROSE ........................................................ CANE SUGAR ZINC CHLORIDE .............................................. TINNER'S FLUID ZINC SULFATE ................................................ WHITE VITRIOL =========================================================================== = =+=+=+=+=+ = = =! NOTE != = = =+=+=+=+=+ = = = = HOT-WIRE Takes No Credit For Any Of These Experiments Provided In This = = File. We Simply Put Together A Bunch Of Bomb Files Found From Many Text = = File BBS' And Re-Typed Them To Create "THE BAD BOOK OF BOMBS". We Also = = Added A Couple Other Good Features To This File. I've Tried To Keep The = = Spelling Mistakes Down To A Minimum,That's The Best I Could Do. We've = = Noticed That The Text File World Has Basically Died,Mostly From Lack Of = = Good Text File Writers,Or Any Writers At All. That's Why We (HOT-WIRED) = = Have Joined Together As A Group To Write Some Decent Files; Dealing = = With All Sorts Of Different Subjects. = = Well That Wraps It Up For Now... Until Our Next Text File. = = =========================================================================== +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1992 HOT-WIRED HOT-WIRED HOT-WIRED HOT-WIRED HOT-WIRED HOT-WIRED 1992 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ --------------------------------------------------------------------------- -=- CALL THESE TEXT FILE BBS' -=- --------------------------------------------------------------------------- TRAUMA HOUNDS.....................24h/7d.......1200/14400....604-589-1570 TOMMY'S HOLLIDAY CAMP NODE #1....24h/7d.......2400/9600.....604-361-4549 TOMMY'S HOLLIDAY CAMP NODE #2....24h/7d.......2400/9600.....604-361-1464 RIPCO.............................24h/7d.......1200/2400.....312-528-5020 & THE TEMPLE OF THE SCREAMING.....24h/7d.......1200/2400.....510-935-5845 ELECTRON [SINISTER/HOT-WIRED]'92