Path: senator-bedfellow.mit.edu!bloom-beacon.mit.edu!news.kodak.com!news-nysernet-16.sprintlink.net!206.229.87.26!news-east.sprintlink.net!news-peer.sprintlink.net!news.sprintlink.net!news-peer.gip.net!news.gsl.net!gip.net!newsxfer3.itd.umich.edu!newsxfer.itd.umich.edu!news.ececs.uc.edu!not-for-mail From: montjoy@ececs.uc.edu (Rob Montjoy) Newsgroups: comp.sys.sun.admin,comp.sys.sun.misc,comp.unix.solaris,comp.answers,news.answers Subject: FAQ: Sun Computer Administration Frequently Asked Questions Supersedes: Followup-To: poster Date: 1 Aug 1998 00:15:44 -0400 Organization: University of Cincinnati Lines: 3591 Sender: montjoy@news.ececs.uc.edu Approved: news-answers-request@MIT.Edu Distribution: inet Expires: 29 Aug 1998 04:15:35 GMT Message-ID: Reply-To: Rob_Montjoy@ECECS.UC.EDU NNTP-Posting-Host: news.ececs.uc.edu Summary: Answers to questions which appear in comp.sys.sun.* Keywords: Sun Computer Admin FAQ Xref: senator-bedfellow.mit.edu comp.sys.sun.admin:115070 comp.sys.sun.misc:39313 comp.unix.solaris:158217 comp.answers:32410 news.answers:136480 Archive-name: comp-sys-sun-faq Last-modified: 1998/7/6 Version: 1.9.30 Frequently Asked Questions for Comp.sys.sun.admin Last update July 6, 1998 This is a collection of common questions posted to the comp.sys.sun.* hierarchy. Please send corrections or submissions to "Rob_Montjoy@ececs.uc.edu". Mark the Subject as Sun FAQ. Remember lets make this a better FAQ and that requires submissions and corrections so if you have an answer to a nontrival question send it to me. This FAQ is available from ftp.ececs.uc.edu (129.137.8.4) in the /pub/sun-faq/FAQs. Get the file sun-faq.general. Also, ftp.ececs.uc.edu mirrors the FSF/GNU stuff from prep.ai.mit.edu and is available as ftp.ececs.uc.edu:/pub/gnu Finally, ftp.ececs.uc.edu mirrors the security directory off ftp.uu.net as ftp.ececs.uc.edu:/pub/security Other FAQ's that you should check are as follows: Sun Hardware FAQ edited by James W. Birdsall ftp://ftp.ececs.uc.edu/pub/sun-faq/FAQs/Hardware/ Sun Managers FAQ edited by John DiMarco ftp://ftp.cdf.toronto.edu/pub/sun-managers/faq Sun CD-ROM FAQ edited by Mike Frisch http://saturn.tlug.org/suncdfaq Solaris2.x FAQ edited by Casper Dik An HTML version is available from http://www.wins.uva.nl/pub/solaris/solaris2/ A mirror of Casper's directory is available from ftp.ececs.uc.edu:/pub/sun-faq/FAQs/mirrors/Solaris2 which includes the autoinstall pieces. Solaris2.x Porting FAQ by David Meyer ftp://ftp.ececs.uc.edu/pub/sun-faq/FAQs/Solaris2.x-Porting-Hints Solbourne Computer information available provided by Stephen Dowdy dowdy@cs.colorado.edu via http://www.cs.colorado.edu/~dowdy/Solbourne A SunOS 4.x Modem Tutorial is available from http://www.stokely.com/unix.serial.port.resources/tutorials.html and a PPP/SLIP info for SunOS is available from http://www.stokely.com/unix.serial.port.resources/ppp.slip.html Both of these pages have been created by Celeste Stokely celeste@stokely.com Finally, you can check at my "alpha" version of a Sun related Web page at http://www.ececs.uc.edu/SunInfo/sun-tips.html I try to keep these up to date copies of all these files in ~ftp/pub/sun-faq/FAQs on ftp.ececs.uc.edu (129.137.8.4) Notes: As of this writing almost all of these questions apply to SunOS versions up to 4.1.4. SunOS 5.x questions will start appearing gradually as more people start installing SunOS 5.x (Solaris 2.x). I am looking for suggestions on how to split this FAQ into sections. These sections should follow the comp.sys.sun.* newsgroups(app, hardware, admin, misc, and wanted) and section on bettering Sun Security. Basically, what will end up with is a FAQ on each subject. Each FAQ will have a Solaris1.x Section, a Solaris2x section, and a section common to both. I will probably need some volunteers to help coordinate this undertaking.. Send suggestion to the usual address. Some of these questions are out of date and need updating when I get the time (or maybe a little birdie will do it for me) I will update them. Thanks. This article includes answers to the following questions, which are loosely grouped into categories. Questions marked with a '+' indicate questions new to this issue; those with significant changes of content since the last issue are marked by '!'. Questions 1)! How to get DNS working when not running NIS ? 2) How to get DNS to be used when running NIS ? 3) How to properly setup NFS mounting of /var/spool/mail ? 4)! Can I use AnswerBook under X11R5? 5) What does "NFS write error X" mean? 6)! How do I find the amount of memory installed or other system configuration information? 7) Where can I get a version of ftp that does logging? 8) Where can one get SunOS patches? Where can I get patch 10xxxx-xx? 9) How to setup Openwindows Calendar Manager in a distributed environment? 10) Why does the talk command fail between SunOS and any other manufacturer's equipment (like DEC)? 11) How do I setup "anonymous" ftp? 12) How come yppasswdd does not automatically update the yp maps? 13) What does NFS getattr failed/RPC: Authentication error mean? 14) Why did my Quantum 105 megabyte hard disk stop working? 15) Can I replace the 105 megabyte internal drive with a higher capacity model? 16) How can I turn my Sun3 into an X-Terminal? 17) Why is my console login prompt garbled or in some strange alphabet after upgrading to 4.1.3? 18) Why are the "random" missing services at boot time or any other time (even though the services are in the /etc/services file or NIS map)? 19) Where can I get Data Certified tapes for 4-mm or 8-mm tape drives (at reasonable price)? 20) What is "archie"? 21)! How do I synchronize time on my Network? 22) What is the phone number for Sun Express and other numbers of importance to Sun Users? 23)! How do I join sun related mailing lists? 24) How do I use Mac floppies in a SUN drive? 25) How can I transfer floppies back and forth between MS-DOS and Sparc? 26) Why is my biff not "biffing" when using biff in a networked environment? 27) How do I disable L1-A(STOP-A) or re-map it? 28) Why are all the local users "unknown" when using sendmail under 4.1.2? 29)! What are the dump parameters for an exabyte 8200 or 8500? 30)! What are the guidelines for setting up swap space ? 31) What are the general guidelines for maxusers to be set to on machine X? 32) What does "zsN: silo overflow" mean? 33) What does the "N" in "zsN: silo overflow", and other "zsN" messages, signify? 34) How do I set up a Sun serial port both for dial-in and dial-out? 35) I can't get my Sun, running SunOS 4.1[.x], to establish a UUCP connection to some non-Sun machine; it won't log in. What's wrong? 36)! Do the Sun serial ports support RTS/CTS flow control? 37) How do I specify that a serial port should, or should not, ignore the state of the Carrier Detect line? 38) I put in a new "termcap" entry, or updated an existing "termcap" entry, for a terminal, but "vi" doesn't seem to know about my change. Why? 39) I have a Type 5 keyboard, and find its placement of the Caps Lock, Control, and Esc keys inconvenient. How do I remedy this? 40) How can I move keys around on a Sun keyboard, for example exchanging the Caps Lock and Control keys on a Type 5 keyboard? 41) My Sun doesn't have an ANSI C compiler. How can I get one? 42) How do I change the time zone setting on my machine? 43) I'm getting messages that say one of the following: proc: table is full and/or file: table is full and/or dquot: table is full and/or inode: table is full What do these errors mean, and how do I fix the problem? 44) Blank at present. 45)! How do I run X11R5 applications under Openwindows or Openwindows applications under X11R5? 46) Where do I find a "restricted" shell for SunOS? 47)! Will SunOS 4.1.x binaries run under SunOS 5.x? 48) When I try to compile MITs X11R4 applications under Openwindows 3.0, I get the following "undefined" symbols(_get_wmShellWidgetClass, and _get_applicationShellWidgetClass). What is the Problem? 49)! What is Solaris? 50) What does the "nres_gethostbyaddr !=" error mean? 51)! How come my mouse only works in the vertical(or horizontal) direction, how do I repair it? 52) After rebuilding the shared library libc it get some or all the following undefined symbols: dlsym, dlopen, dlclose mbstowcs_xccs, mbtowc_xccs,wcstombs_xccs, or wctomb_xccs. 53) What does "No network locking on host" mean after upgrading to Solaris 2.0? 54) Does Password Aging work with NIS(YP) ? 55) What does "rpc.lockd: Cannot contact status monitor!" mean? 56) How do I join the Sun User Group(SUG)? 57) How do I increase the number of "pseudo" terminals(ptys) ? 58) Where are dump and restore under Solaris 2.x? 59) How do I make the numeric keypad on a type 5 keyboard work with xterm? 60) How do I swap the CAPS LOCK and CONTROL keys on a type 5 keyboard under Openwindows 3.0? 61)! Which Sun models run which versions of SunOS? 62) My rdump is failing with a "Protocol botched" message. What do I do? 63)! Table of Solaris2.x commands and their Solaris1.x equivalents? 64) How do I setup DNS on Solaris2.x? 65) Can a SPARCclassic or LX run SunOS 4.1.3? 66) I just restored my root partation and now I can not boot. What is wrong? 67) How do I disable/enable packet forwarding? 68) How do I disable the printing of banners pages? 69) How do I change my hostname? 70) Table of Solaris2.x files and their Solaris1.x equivalents? 71)! Where can I get the BSD print spooler for Solaris2.x? 72)! Where is the Solaris2.x screenblank? 73)! Is there a command to display the configuration of currently attached SCSI devices? 74) My printer will not print large files(over 1-megabyte), I keep getting "file to big" errors. What do I do? 75)! I keep getting "data corruption" when using NFS over a wan, or slip/ppp link. What do I do? 76) Does anybody know how to enable UDP checksum on NFS? 77) Is there a mailing list for Wabi? 78) Are there any public domain Multi-Vendor backup management systems? 79) How to determine the revision of SuperSPARC processor. 80) How do I install SunOS4.1.x by hand (off a CD)? 81) Why won't my SUN207 (Maxtor LXT213) hard drive work in my SPARCstation 10/xx? 82)! I'm running SunOS/4.1.x and every time I try to format my new 9GB SCSI disk I get "format failed" messages -- what's broke, and how can I fix it? 83)! I can not get my new Exabyte 8505 (or others) working under SunOS (or Solaris) What to do ? 84) The keyboard keeps stop working after exiting X or Openwin. What to do? 85)! How do I re-build the kernel under SunOS4.x? 86) How do I hook up a HP(or other) Desktop SCANNER? 87)! How do I find which process has a file open? 88) How do I create a partition greater than 2-gig on SunOS4.1.x? 89) Why do I keep having to answer the question "CLEAN FLAG IN SUPERBLOCK IS WRONG; Fix?" when running fsck on an active filesystem? 90) Are dynamically linked setuid executables insecure? 91) How do I change the default router under Solaris1.x or Solaris2.x? 92) What is the difference between the Domestic vs International version of SunOS 4.1.x? 93) Where can I get the latest version of TOP? 94) Can I run the SX card in a Sun running SunOS4.1.x? 95) I just changed my shell to tcsh(or pick a favorite) and get "530 User xyzz access denied" when ftping into this machine. What is the problem? 96) How do I put several dump images on one tape? 97) Can I "dump" the whole disk to tape in one command? (even with several slices/partitions) 98)! Where do I get software for my HP JetDirect Ethernet Card? 99) I do not know the root password, What do I do? 100) Where do I find a POP server for Solaris or SunOS? 101) How do I clear Stale NFS Filehandles? 102)! How can I use the same ethernet interface for two different IP networks? 103)! Where do I get CAP for Solaris (or SunOS 4.1.x)? 104) Where do I get DOOM for Solaris (or SunOS 4.1.x)? 105) Why does "dump/ufsdump" tell me it is rewinding the tape even when I specified the "no rewind" device? 106) How can you I speed up filesystem restores and/or copies? 107) I just added a new device (ie harddisk) to Solaris I have rebooted but the system still can not find it. What do I do? 108) I need to change the broadcast address from all 0's to 1's or where to set the broadcast address under SunOS4.x? Answers 1) How to get DNS working when not running NIS ? Note: Solaris2.x users should see question 64.. The "normal" behavior of a hostname lookup under NIS is to consult the NIS hosts map and then DNS (if configured). If you are not running NIS the system will only look in the /etc/hosts file. You have two options to correct this situation: A) Re-build the shared library version of libc with replacement resolver routines which understand DNS. Resolv+ provides one of the best sets of replacement routines and it is easy to install. Resolv+ can be obtained from ftp.ececs.uc.edu:/pub/sun-faq/Source/resolv+2.1.1.tar.Z If you install resolv+ make sure that you setup your /etc/hosts.conf . /etc/hosts.conf should contain something like this: order bind hosts multi off nospoof on Another option to use is bind-4.9.3 or later which is available from ftp://ftp.vix.com/pub/bind/release/ However, the bind shared libraries will ignore /etc/hosts and do all lookups via DNS. Rebuilding the shared library will not allow statically linked binaries to do name resolving and these binaries will only use /etc/hosts. "Dynamically linked" replacements for mount and rcp are available from ftp.ececs.uc.edu:/pub/sun-faq/Source/rcp-mount.dyn.tar.Z This file only contains sun4 binaries. A Sun 3 binary for mount can be retrieved from ftp.ececs.uc.edu:/pub/sun-faq/Source/mount.sun3.Z To be able to rebuild shared libraries you need to install the "shlib custom" option which is available with SunOS version 4.1 or greater. You can still use NIS for other things in environment, such as passwd, and group maps. B) Run NIS with the "hosts" maps only. If you only need DNS capability than change the "all" line /var/yp/Makefile to "all: hosts". It does not require any changes to shared libraries. See question 2 for complete directions on how to setup DNS with NIS. Last Updated: July 3, 1996. 2) How to get DNS to be used when running NIS ? First setup your /etc/resolv.conf file. Use this file as a template. ; ; Data file for a client. ; domain ececs.uc.edu ; local domain nameserver 129.137.8.118 ; primary domain nameserver nameserver 129.137.32.101 ; secondary domain nameserver Where: "local domain" is the domain part of the hostnames. For example, if your hostname is "ftp.ececs.uc.edu" your "local domain" is "ececs.uc.edu" or you could use "uc.edu". Verify using nslookup that you are now resolving names via DNS. Try something like "nslookup ftp.uu.net" and see if you get back the IP address. You will need to put a copy of this resolv.conf on all NIS servers including slaves. After you have the /etc/resolv.conf setup and working do the following: Under SunOS 4.1 and greater, at the top of the /var/yp/Makefile uncomment the "B=-b" line and comment using the "#" sign the "B=" If you are running 4.0.x you will need to edit the /var/yp/Makefile or apply the following "diff": *** Makefile.orig Wed Jan 10 13:22:11 1990 --- Makefile Wed Jan 10 13:22:01 1990 *************** *** 63 **** ! | $(MAKEDBM) - $(YPDBDIR)/$(DOM)/hosts.byname; \ --- 63 ---- ! | $(MAKEDBM) -b - $(YPDBDIR)/$(DOM)/hosts.byname; \ *************** *** 66 **** ! | $(MAKEDBM) - $(YPDBDIR)/$(DOM)/hosts.byaddr; \ --- 66 ---- ! | $(MAKEDBM) -b - $(YPDBDIR)/$(DOM)/hosts.byaddr; \ Now setup NIS in the usual fashion (ypinit -m ) or if your "brave" and have already setup NIS just re-make the hosts map. Something like this should work remove /var/yp/hosts.time, cd /var/yp, and type make (i.e. cd /var/yp; /bin/rm -f hosts.time ; make). You will need reboot the machine or restart ypserv for these changes to take affect. The manpage for ypserv incorrectly states that you need to start ypserv with the -d option to get DNS to work with NIS. The manpage is incorrect -d option is for debugging. If you need a copy of the NIS Makefile look in /usr/lib (NIS.Makefile). Or grab the Makefile from ftp.ececs.uc.edu:/pub/sun-faq/Makefile.nis Last Updated: July 20, 1995. 3) How to properly setup NFS mounting of /var/spool/mail ? On the Client machines: A) mount /var/spool/mail with the no attribute caching option. An example, fstab line would be the following: mailhost:/var/spool/mail /var/spool/mail nfs rw,noac 0 0 B) Use a sendmail.cf that forces all mail to be delivered by the mailhost. One such file is available via anonymous ftp to ftp.ececs.uc.edu. Get the file /pub/sun-faq/sendmail.client.cf Do not use the OR option that Sun provides. It is broken in many ways. On the server machine: A) Setup DNS MX records pointing to the mailhost for all client machines. B) Edit the /etc/exports file to export /var/spool/mail to the mail client machines. You may want to use a netgroup for this purpose. C) Setup the /etc/sendmail.cf on the server recognize that mail to/from a client is "local". One such file is available via anonymous ftp to ftp.ececs.uc.edu. Get the file /pub/sun-faq/sendmail.server.cf Note: You may want to install Berkeley sendmail instead of Suns stock sendmail. 4) Can I use AnswerBook under X11R5(6)? AnswerBook in its current form requires the Openwindows server. It uses the NeWS/Display Postscript extensions to this server to display the Answerbook files. To use AnswerBook under X11R5 you will need to replace the docviewer program with program that calls Ghostscript to view these pages. A replacement docviewer can downloaded from ftp.ececs.uc.edu (129.137.8.99) as /pub/sun-faq/Source/docviewer.tar.gz This kit contains more than one docviewer. Try using the one in the toplevel docviewer directory. This replacement docviewer does not support all the options that the "real" docviewer supports such as "hypertext" links. To install the replacement "docviewer" you will also need Ghostscript 2.4 or above and Ghostview 1.3 or above both of which are available from prep.ai.mit.edu in the /pub/gnu directory. This replacement docviewer is reported to work with all versions of AnswerBook but not as well as the original :). Note: The Solaris 2.6 documentation can be accessed via the web at: docs.sun.com Last Updated: Apr 25, 1998. 5) What does "NFS write error X" mean? You can lookup the error codes in /usr/include/sys/errno.h. Two common NFS error codes are 13 - "permission denied" and 70 - "stale file handle". Error code 13 can occur from incorrect /etc/exports entry. Also, it can occur because someone has changed the /etc/exports entry to disallow the client after the client has already been granted permission to perform this operation. Error code 70 occurs when the file handle on the NFS server changes for a particular filesystem. The "file handle" can be changed under the following circumstances: A) Installing a new drive in place of an old. B) Moving a filesystem from one devices to another. C) Performing a format, newfs, dump, and restore cycle. Even if to the same device. D) Unmounting a file system without remounting it. E) Unmounting a High Sierra/ISO 9660 CD-ROM and mounting a different CD. You can usually get rid of the error by unmounting and remounting the filesystem in question. Also, error code 70 can occur when someone removes a file that a process is actively writing from a NFS client machine. Under SunOS 4.1, you can run "showfh" to translate the NFS "file handle" given in the error message into a Unix pathname. Beware that showfhd does a "find" on your server to get the filename. "man 2 intro" will give you some more general information on what error codes could mean. You will need a patch to get "showfh" to work correctly. The patch id is 100371 and this patch is required for 4.1, 4.1.1, and 4.1.2. This patch has been integrated into 4.1.3. 6) How do I find the amount of memory installed or other system configuration information? You can use the "devinfo" command to find out general information about the hardware attached to your Sun. The "devinfo" command is only available on desktop SPARCsystems, SPARCengine 1E (although not in the version used in Auspex systems), or 600MP series server only. Also, most sparc clones should support devinfo. Any machine that has an SBus will probably support "devinfo" but any machine that doesn't have an SBus probably won't support "devinfo". Note in Solaris "devinfo" is called "prtconf" and all options are the same. The "best" command for determining system information is "sysinfo". Sysinfo is available from ftp://usc.edu/pub/sysinfo/ Sysinfo works on all Sun architectures (including Sun-3s) and all SunOS and Solaris releases as well as many other UNIX boxes such as Ultrix, and Next. Also, you can use the sundiag to find out configuration information as follows: /usr/diag/sundiag/sundiag -wv /bin/cat /usr/adm/sundiaglog/sundiag.conf | /bin/sort Finally, the "dmesg" command can be used to get memory information. Try something like "dmesg | grep -i memory". It may not return any memory information if the system has been up for a while. Note: "wc -l /dev/mem" and "dd if=/dev/mem of=/dev/null" and the like will *not* give the correct answer on machines where physical memory is not contiguous, such as many Suns. OpenWindows 3.3 and above also support the "wsinfo" command, which provides some of this information, in particular memory size. Last Updated: May 23, 1996. 7) Where can I get a version of ftp that does logging? Get the wuarchive ftp daemon from ftp://wuarchive.wustl.edu/packages/wuarchive-ftpd A version of the wuarchive ftpd daemon that compiles right out of the box for Solaris2.x machines can be had from ftp.ececs.uc.edu (129.137.8.4) in the /pub/sun-faq directory. Remember to specify your own paths in the src/pathnames.h file. The stock Sun ftpd will log some information if you add the "-l" flag in /etc/inetd.conf: ftp stream tcp nowait root /usr/etc/in.ftpd in.ftpd -l Also enable syslogd by adding: daemon.info /var/adm/syslog to "/etc/syslog.conf". Last Updated: Oct 25, 1995. 8) Where can one get SunOS patches? Where can I get patch 10xxxx-xx? Many anonymous ftp sites have partial collections of patches. These sites include the following: Sun sanctioned sites: sunsolve1.sun.com:/pub/patches/ via WWW http://sunsolve1.sun.com/ sunsite.unc.edu:/pub/sun-info/sun-patches/ sunsite.unc.edu:/pub/sun-info/sun-patches/ sunsite.sut.ac.jp:/pub/sun-info/sun-us/sun-patches/ sunsite.doc.ic.ac.uk:/sun/sunsite-sun-info/sun-patches/ Note: You should always attempt to find a local site before using the above. sunsolve1.sun.com contains a collection of recommended and security patches. Be sure to check out the 2.x_Recommended.tar.Z files which contain all the Recommended patches in one file. The "Sunsites" are essentially mirrors of sunsolve. Support Customers: Starting with SunSolve CD 2.1.2 ALL Sun patches are shipped on the SunSolve CD. Support customers can get all patches via ftp from Sunsolve or by e-mail and query one of the online sunsolve-databases on the internet. Some notes: Do install the Recommended patches. If you find a bug report it to Sun. This is the only way it will get fixed. Do not "blindly" install all patches. Sun does not always have time to test for possible interactions between patches. Do not install patches for applications that you do not use. Do install patches for "bugs" that are actually affecting you. Last Updated: Feb 2, 1998. 9) How to setup Openwindows Calendar Manager in a distributed environment? Sun's original assumption that each user has a permanent machine allocated to them is not applicable in most environments. Just as users send mail to 'user' rather than 'user@machine', users want to browse others user's calendars and do not care or want to know where the calendar is actually stored. Here is procedure to accomplish our goal. All calendars will be stored on a central server. The initial setup must be done on the server. A) Have the user login to the calendar host(calhost) machine. B) Change everyone's .cm.rc file so that Calendar.DefaultCal points to user@calhost calhost can be an hostname alias or an actual hostname. You may want to use the alias just in case you change the "calhost" later. C) Change their Access List and Permissions (under Edit/Properties) to show user@client with BID (browse, insert, delete) permissions for any client machine the user wanted to access their calendar from. Notes: If you use the scheme you should not NFS mount /var/spool/calendar on the client machines. or You can install the "Proxy OpenWindows Calendar Manager", which is available via anonymous FTP from ftp.ececs.uc.edu in /pub/sun-faq/proxy-cmsd.tar.Z. or You can install the "new cm daemon" which allows you to access several Calendar hosts at once. It implements the "original" rpc.cmsd daemon semantics(unlike proxy-cmsd) and thus all the features(of CM) will work as documented. The latest source for this daemon was available via anonymous FTP from ftp.amdahl.com (129.212.11.1) in the /pub/newcm_d directory but alas it is no longer but you can still get a copy from from ftp.ececs.uc.edu as /pub/sun-faq/newcm_d-1.3.tar.Z As of this writing newcm is being ported to Solaris2.x. 10) Why does the talk command fail between SunOS and any other manufacturer's equipment(like DEC)? SunOS and Solaris use the old BSD 4.2 version of talk. The old talk uses "machine dependent" byte ordering. Since DEC has different byte order the two talks can not communicate (even if you use "otalk" on the DEC machines). Also, most vendors have the newer version of talk from BSD-4.3 and this version is not compatible with the Sun Version which is BSD-4.2. The solution is to get and install the new version of talk because it uses "network" byte ordering and it is compatible with most Vendors current talk implementations. "New Talk" is available via anonymous ftp from ftp.ececs.uc.edu:/pub/sun-faq/Source/ntalk.tar.gz This contains a version of new talk that compiles on both Solaris and SunOS. The Solaris version does not require the Berkeley compatability libraries. Finally, a program called Ytalk can be used with either "New talk" or "Old talk" and compiles on all versions of SunOS (including 5.x). Ytalk can be obtained from ftp.ececs.uc.edu:/pub/sun-faq/Source/ytalk-3.2.tar.gz Last Updated: November 12, 1995 11) How do I setup "anonymous" ftp? Read the man page ftpd(8) in the SunOS 4.x documentation, as the procedure differs from vanilla BSD and most examples in system administration books. The "ls" binary is dynamically linked, requiring you to duplicate ld.so, libc.so.* and /dev/zero in the ftp area. The permissions and ownership of the files within the ftp area are critical to having a secure configuration. Note: For SunOS versions 4.1.2 and 4.1.3 you will need to copy /usr/lib/libdl.so.* to the ftp area as well. You can use a "statically" linked binary from the GNU fileutils instead of the "dynamically" linked SunOS version. You can get the GNU fileutils from prep.ai.mit.edu in the directory /pub/gnu There is also a statically linked version of ls for Suns running SunOS 4.1.x, available via anonymous ftp from ftp.ececs.uc.edu. Get the file /pub/sun-faq/ls.statically-linked or get it from the SunOS install CD in the "tools" directory. A complete procedure to setup anonymous under SunOS is available via anonymous ftp to ftp.ececs.uc.edu. Get the file /pub/sun-faq/anon-ftp.how-to. There is an _excellent_ script written by Peter N. Lewis (peter.lewis@info.curtin.edu.au) for setting up anonymous ftp located on ftp.ececs.uc.edu, in the file /pub/sun-faq/anon-ftp.scrpt 12) How come yppasswdd does not automatically update the yp maps? There is a bug in 4.1 rpc.yppasswdd that causes it misinterpret the command line arguments. A work-around is to add the "-nosingle" flag (which is the default), this shifts the arguments over one, so "passwd" is read instead of "-m". Also, you should use the complete path to rpc.yppasswdd For example: /usr/etc/rpc.yppasswdd /var/yp/passwd -nosingle -m passwd DIR=/var/yp Note: Only use the DIR=/var/yp if your source files for passwd, group, etc are in /var/yp. If they are in /etc you do not need to and should not specify the DIR= parameter. Also, you can modify the NIS Makefile to change to the location of the maps (ie modify DIR= in /var/yp/Makefile). Than you could use something like this instead of the above line: /usr/etc/yppasswdd /var/yp/maps/passwd -noshell -m passwd This assumes that all NIS text/source files are in /var/yp/maps If you are running the C2 security package, you should apply the C2 Jumbo patch, as it fixes several problems with rpc.yppasswdd and rpc.pwdauthd. The patch number is 100201-04 or greater for SunOS 4.1 and 4.1.1 100564-06 or greater for SunOS 4.1.2 and 4.1.3 Last Updated: April 27, 1995. 13) What does NFS getattr failed/RPC: Authentication error mean? You are probably running a pre-SunOS 4.0 version of NFS and your username is in more than 8 groups. There is a limit on the number of groups that could be represented in the rpc service (called NGRPS). On pre-4.0 systems this was 8, now it is 16. Since many vendors other than Sun are still running old versions of NFS, you might see this error even if your SunOS is recent. Authentication errors are also caused by having secure RPC enabled on the client but not on the server, or by having a misconfigured secure RPC configuration for the user name generating the errors. Beware of this problem when you are using the automounter, as programs (such as Sendmail) may silently fail when when they try to mount a directory and get this error. Last Updated: Feb 23, 1998. 14) Why did my Quantum 105 megabyte hard disk stop working? This the now infamous Quantum drive "stickation" problem. If the drive is allowed to cool down(even for a short period of time) the drive lubricant will congeal and prevent the disks platters from rotating. Before you get a replacement, try lightly tapping the drive to loosen the lubricant. If this does not work try shaking and twisting the drive at the same time. One last thing to try is to lift the system up a couple of inches and drop it. 15) Can I replace the 105 megabyte internal drive with a higher capacity model? The newer disk drives can be used without worrying about heat or power supply capacity problems. However, older technology drives drives create more heat and draw more power than the 105S. The case cooling ability and power supply in the SS-1 and SS-1+ are not adequate for the 210 megabyte or higher capacity drives possible in the SS-2. As long as you make sure that the drive draws no more power than the 105-Meg drive you should have no problems. Only the SPARCstation 1 and 1+ have these limitations. 16) How can I turn my Sun3 into an X-Terminal? You can use Seth Robertson's Xkernel package. It is available via anonymous ftp from ftp.ctr.columbia.edu (128.59.64.40) in /Xkernel. The package describes how to configure a minimal kernel that runs the X server and offloads all the clients onto another, hopefully more powerful host on the network. As of this writing the current version of Xkernel is 2.0 and it should work on both SPARC and Sun3 platforms. Xkernel is attractive to some sites that have a large investment in sun3 platforms, as moving most of the processing off the sun3 cpu makes it tolerable to use. Finally, a used 3/50 is competitive with low-end X Terminal and you get a 19" monitor with an optical mouse. 17) Why is my console login prompt garbled or in some strange alphabet after upgrading to 4.1.3? The problem is /etc/ttytab, with 4.1.3, the console is now able to display 8 bits characters and getty must take this into account. The solution is easy, replace your console entry in /etc/ttytab by the following, the important part is 'cons8': console "/usr/etc/getty cons8" sun on local secure Also, if you did an upgrade(instead of a full install) you may need to add the following to your /etc/gettytab. # This is a new entry to internationalize the console. It needs to be # 8 bit clean so that ISO 8859 characters can be displayed without # the window system. # cons8:\ :p8:lm=\r\n%h login\72 :sp#9600: 18) Why are the "random" missing services at boot time or any other time (even though the services are in the /etc/services file or NIS map)? The three primary causes for "random" missing services are as follows: A) "Blank" lines in /etc/services on the YP/NIS Master. Delete the blank line and remake the services map. B) Check the permissions on /etc/services. Non-root processes need read permissions so /etc/services should be mode 644. C) NIS/YP server not responding quickly enough to the "getservbyname" call because each getservbyname call reads the whole map. One fix is to replace the systems version of inetd with a version that re-tries the "unknown" service. I have "hacked" a version of munetd(public domain replacement for inetd) to do this. It is available from ftp.ececs.uc.edu. Get the file /pub/sun-faq/Source/munetd.tar.Z Another solution to this problem is outlined in part C below. D) Sun's implementation of the services map is incorrect. To correct this problem you will need to replace some library routines in libc and rebuild the shared library. These routines and directions on installing them are available from ftp.ececs.uc.edu. Get the file /pub/sun-faq/Source/getservent.tar.Z. E) Another fix(if you do not want to modify your libc's) is to just remove the services map from NIS. However, you will need to update the services file by hand on all clients. We are running all NIS hosts this way and it seems to work quite well. 19) Where can I get Data Certified tapes for 4-mm or 8-mm tape drives (at reasonable price)? Here is an incomplete list of vendors how have "data certified" tapes for the exabyte. Misco 800-876-1726 $12 - 15 each. TecBridge 800-972-7405 $9 - 15 each. R-Squared 800-777-3478 Sony 112m 120@8.00 Each K and K Systems 612-475-1527 $10 Each SCR 314-739-0808 $10.95 for Memorex CPI 800-522-4274 Sony 112m 120@7.00 Each Last Updated: July 22, 1995. 20) What is "archie"? Archie is a database of what is on several thousand anonymous ftp sites. To use archie get one of the three archie clients which are as follows: xarchie - For use under X11 c-archie - Curses version of Archie archie - Perl Version of Archie Theses are available from archie.ans.net in the directory /pub/archie. List of other publicly available archie servers: archie.rutgers.edu 128.6.18.15 (Rutgers University) archie.unl.edu 129.93.1.14 (University of Nebraska in Lincoln) archie.sura.net 128.167.254.179 (SURAnet archie server) archie.ans.net 147.225.1.2 (ANS archie server) archie.au 139.130.4.6 (Australian server) archie.funet.fi 128.214.6.100 (European server in Finland) archie.doc.ic.ac.uk 146.169.11.3 (UK/England server) archie.cs.huji.ac.il 132.65.6.15 (Israel server) archie.wide.ad.jp 133.4.3.6 (Japanese server) archie.th-darmstadt.de 130.83.128.111 (German server) 21) How do I synchronize time on my Network? You should use xntp version 3 to synchronize your time. Xntp synchronizes to "atomic" and/or Radio Frequency clocks. Using xntp time should always be within a few "milliseconds" of the actual time. Xntp does not require a "atomic" clock, any stable UNIX host clock will do. You can get XNTP version 3 from ftp://ftp.udel.edu/pub/ntp/ XNTP works with all versions of SunOS(4.x and 5.x). Also, A web page for XNTP is available at http://www.eecis.udel.edu/~ntp Finally, Solaris 2.6 now cames with XNTP version 3.5Y. Note: There is a Macintosh Control Panel extension available too.. Last Updated: December 1, 1997. 22) What is the phone number for Sun Express and other numbers of importance to Sun Users? Sun Express: 1-800-USE-SUNX (1-800-873-7869) Main Sun Helpline: 1-800-USA-4SUN (1-800-872-4786) Auspex Systems Inc. : 2300 Central Expressway Santa Clara, CA 95050 (800) 735-3177 or (408) 492-0900 Fax: (408) 492-0909 E-mail: info@auspex.com Web: http://www.auspex.com Last Updated: June 22, 1998. 23) How do I join sun related mailing lists? Mailing Lists: Sun Managers: Used for "emergency" information only. The users of this list are "very" knowledgeable. sun-managers-request@eecs.nwu.edu add requests sun-managers@eecs.nwu.edu submissions Sun-386i: discussion about the Sun 386i product sun-386i-request@ssg.com add requests sun-386i@ssg.com submissions Suns-at-Home is a mailing list devoted to folks who have Sun Workstations at home. We hope to cover topics such as: - Maintenance and parts - Software - dial-up access (SLIP, modems) - Uses of Suns at Home (Home control, UUCP, BBS systems) You can reach Suns-at-home through the following addresses: Article submissions go to: Suns-at-Home@net-kitchen.com Administrative requests go to: Suns-at-Home-Request@net-kitchen.com Auspex: managers of Auspex NFS file servers auspex-request@princeton.edu add requests auspex@princeton.edu submissions Epoch: managers of Epoch NFS file servers EPoch Users Forum (EPUF) epuf-request@mcs.anl.gov add requests epuf@mcs.anl.gov submissions Various SunFlash Mailing Lists: SunFlash: Articles about Sun from Sun. Includes Press Releases, detailed intros, Sun e-newsletters, sunergy announcements John J. McLaughlin Editor/Publisher (flash@sun.com) Available in a variety of formats: List name Description sunflash daily sunflash. Many articles will have just summaries for the articles posted. use the autoresponder to get the full text sunflash-f full list - all articles - no summaries sunflash-w weekly list - one summary article per week sunflash-m monthly list - one summary article per week mt-sunflash summary article in the message body, and all articles included as MailTool style attachemensts mime-sunflash like mt-sunflash, but with MIME attachements mt-sunflash-w like mt-sunflash but once per week mime-sunflash-w like mime-sunflash but once per week Subscribe by sending email to majordomo@flashback.com The message body should contain the word subscribe followed by one of above lists names. E.g. subscribe mt-sunflash The Sun FlashBack: Articles of interest to the Sun community from vendors other than Sun. Includes Press Releases, Sun User Group announcements, Product announcements, Company newsletters, newsletter table of contents (e.g. "HPCwire", "WEBster', "SPARCFlash"), trade magazine table of contents (e.g. "Advanced Systems", "Open Computing", "Sun Onserver"), Conference/Seminar/ Trade-Show announcements, Text Book announcements, Sponsored technical articles. John J. McLaughlin Editor/Publisher (flash@flashback.com) Available in a variety of formats: List name Description flashback daily flashback. Many articles will have just summaries for the articles posted. use the autoresponder to get the full text flashback-f full list - all articles - no summaries flashback-w weekly list - one summary article per week flashback-m monthly list - one summary article per week mt-flashback summary article in the message body, and all articles included as MailTool style attachemensts mime-flashback like mt-flashback, but with MIME attachements mt-flashback-w like mt-flashback but once per week mime-flashback-w like mime-flashback but once per week Subscribe by sending email to majordomo@flashback.com The message body should contain the word subscribe followed by one of above lists names. E.g. subscribe mt-flashback Send for intro (article 9001), help, index or fullindex to flashback@flashback.com. ftp archives on draco.nova.edu pub/sunflash WWW files on draco.nova.edu pub/sunflash/www URL ftp://draco.nova.edu/pub/sunflash/www/index.html NOTE!!! if you wish to be added to one of the above mailing lists, send mail to the REQUEST address! Do not send add requests to the main address! Last Updated: Sept 25, 1995. 24) How do I use Mac floppies in a SUN drive? You can not use "real" Mac floppies without buying either one of the emulator packages like Liken from Andataco(?) or Mae from Apple (only runs on Solaris2.3 or above). They is another product or two that just allows you to mount Macintosh floppies onto your Sun but the vendors and product names escape me now. That said if all you want to do is exchange files the easiest way is to use suntar on the Macintosh to copy files to a "high density" floppy. Then you can use "tar" or "bar" on the Sun to get the files off this floppy. It is available from ftp.ececs.uc.edu (129.137.8.99) as /pub/sun-faq/Source/suntar-203.hqx or visit the Info Mac archives at wuarchive.wustl.edu. or You could use the Apple File Exchanger to translate the files to MS-DOS format. Then use one of the many methods for transferring MS-DOS disks to Sun. System 7.5 now mounts dos floppies automatically no need for Apple File Exchanger. These methods should only be used with files like ascii files, wordprocessor files, and spreadsheet data files. Mac application programs should not be transfered. Finally, low density Mac floppies are not compatable with Sun floppy drives. Last Updated: January 27, 1995. 25) How can I transfer floppies back and forth between MS-DOS and Sparc? For Solaris2.2 and above you can use the Volume Manager to control your disks and CD-ROM's. Under SunOS 4.0 there are two packages which allow you to do mount floppies (mtools and mntdisk). Both of these packages use the 3-1/2inch floppy drive available on most SPARCstations. Mntdisk can be used to manage CD-ROMS and other removable media types as well. With the advent of the Volume manager in Solaris2.2 these programs have been rendered somewhat obsolete. Under Solaris2.x use volcheck -v to check in a floppy. Than you can use normal UNIX commands on this floppy like cd, mkdir, cp, mv, and ls. It usually gets mounted on /vol/floppy0 Mtools writes directly to the floppy device and it does not require any special privileges. It is faster than mntdisk but it requires the user to learn a new set of commands. A copy of mtools can be found at prep.ai.mit.edu:/pub/gnu/ With the proper changes to the source code mtools can even be made to work with the Solaris2.x Volume Manager. All you need to do is make mtools look in /vol/dev/diskette/... for the floppy devices. mntdisk "mounts" the floppy using the "pcfs" filesystem type. Once mounted you can use regular UNIX commands(cp,mv,and rm) to access it. The pcfs filesystem is quite slow compared to using mtools above. Mntdisk is available in your local comp.sources.misc archive, Volume 22, Issues 31-33. Mntdsk can be used to mount CD-ROMS and even UFS floppies. You should never use "setuid" shell scripts for mounting floppies. Also, C programs that use the system() function call should not be used either. Both can open up huge security holes which hackers can be used to break into your system. Last Updated: January 27, 1995. 26) Why is my biff not "biffing" when using biff in a networked environment? In its current form comsat/biff are only usable on the mail server. You need to replace them network capable programs. A shar file containing network capable versions of comsat and biff is available from ftp.ececs.uc.edu. Get the file /pub/sun-faq/Source/biff-comsat. 27) How do I disable L1-A(STOP-A) or re-map it? You need to get one of the many re-mapping programs. You can get it from: ftp.ececs.uc.edu:/pub/sun-faq/Source/disable-L1-A.tar.Z Always password protect your NVRAM. Set the security to command otherwise anyone can set this password to anything they want. Of course you can get it back as root by doing a strings /dev/eeprom and it should show up in plain text. This assumes you have root access. 28) Why are all the local users "unknown" when using sendmail under 4.1.2? There is a known problem with sendmail and frozen config files under 4.1.2. The fix is to remove /etc/sendmail.fc. Also, You could try moving it to the end of /etc/rc.local. However, the best "fix" may be to install the new Berkeley Sendmail it has a number of enhancements, performance improvements, and security enhancements. You can get Berkeley sendmail from ftp.cs.berkeley.edu(128.32.149.78). Get the following files: /ucb/sendmail/*8*6*9* /ucb/4bsd/db.tar.Z Also, you will need bind 4.9 and it can be found on gatekeeper.dec.com(16.1.0.2) in the /pub/BSD/bind/4.9 directory. Finally, if you do not want to build the Berkeley sendmail for yourself I will be willing to mail you a copy. 29) What are the dump parameters for an exabyte 8200 or 8500? 8200 -- dump 0budfs 126 54000 /dev/rst0 6000 /filesystem 8500 -- dump 0budfs 126 54000 /dev/rst0 13000 /filesystem Under 4.1.2 and above you should use rst8. Previous SunOS versions did not do anything special for the 8500. These parameters are not needed for Solaris 2.x because it can do the right thing if it reaches EOT (end of tape). Sept 20, 1995 30) What are the guidelines for setting up swap space ? In SunOS 4.x the amount of swap space and Virutal memory are one and the same so you need at least as much swap as real memory. In SunOS 5.x the amount of Virutal memory is equal swap space plus real memory. Under SunOS 5.x you can actually get away with having no swap space at all. We are running a SPARCserver 1000 with no swap and 192-Meg of real memory. Of course you will end up wasting some space because things that really could be swapped out can not be. The old rule of thumb is 1.5 to 2 times real memory. This can lead to wasted disk space (by having too much swap space) or to not having enough. What you need to do is to estimate your swap space needs. Of course if you under-estimate your swap needs or periodically need additonal swap space you can use mkfile to create a swapfile (ie mkfile 25m swapfile). Do not use the "-n" option on local swap files. This option should be only used for NFS mounted swap space. To use you new swap space you can use the following commands: swapon /fullpath/to/file -- SunOS 4.x or swap -a /fullpath/to/file -- SunOS 5.x To delete the swap space under SunOS 4.x you have to reboot. In SunOS 5.x you can delete swap space using swap -d . You can also turn swap space into filesystem space by mounting a tmpfs filesystem in swap. A tmpfs file is not completely equivalent to a disk file, since file and record locking is not supported. However tmpfs is nice since you now have one block of disk being shared by the swap space and the filesystem, with the split being dynamically changed depending on usage. Finally, if you use X and tend to leave many applications in core in various windows, you'll need much more swap space. Last Updated: July 7, 1995. 31) What are the general guidelines for maxusers to be set to on machine X? This question is being written. 32) What does "zsN: silo overflow" mean? The CPU serial ports - both ordinary serial ports A and B, and the port for the keyboard and mouse - use the Zilog Z8530 SCC chip. That chip has a 3-character on-board buffer called the "silo". If a character arrives in the silo, the chip interrupts the CPU at a high priority, and the interrupt service routine reads the character out of the silo. If the interrupt isn't serviced in time, more than 3 characters can be placed in the silo by the chip; if so, the chip notes that the silo "overflowed", and the interrupt service routine, when called, will note that a "silo overflow" occurred. If the machine is printing a message from the kernel, interrupts from the chip will be held off; if the message takes long enough to print, and characters are coming in quickly enough on the serial port, more than 3 can arrive, and a "silo overflow" will occur. It is possible that a machine that's sufficiently busy in other code that runs with interrupts held off could get a silo overflow as well. 33) What does the "N" in "zsN: silo overflow", and other "zsN" messages, signify? The name "zsN" is ambiguous. In kernel "config" files, and in the boot-time autoconfig messages, "zs0" is the first on-board Z8530 chip, the two channels of which handle "ttya" and "ttyb", respectively, and "zs1" is the second on-board Z8530 chip, the two channels of which handle the keyboard and mouse ports, respectively. In "zsN: silo overflow" messages and the like: "zs0" is the A channel on the first on-board Z8530, handling "ttya"; "zs1" is the B channel on the first on-board Z8530, handling "ttyb"; "zs2" is the A channel on the second on-board Z8530, handling the keyboard; "zs3" is the B channel on the second on-board Z8530, handling the mouse. So a "zs0: silo overflow" error is for "ttya", and a "zs1: silo overflow" error is for "ttyb", not for the keyboard or mouse. Keyboard silo overflows are "zs2: silo overflow"; mouse silo overflows are "zs3: silo overflow". 34) How do I set up a Sun serial port both for dial-in and dial-out? You need to read Chapter 11 in the "Systems and Network Administration" manual. 35) I can't get my Sun, running SunOS 4.1[.x], to establish a UUCP connection to some non-Sun machine; it won't log in. What's wrong? The 4.1[.x] UUCP normally runs in even-parity mode when logging into another machine. If the other machine is running in 8 bits, no parity, mode, the fact that the 8th bit is set on some of the characters the Sun is sending to it will confuse it. The Sun can be made to turn the 8th bit off by putting P_ZERO into the "expect / send" sequence for dialing. Good places are /etc/uucp/Systems or /etc/uucp/Dialers. Putting it into the Dialers file has the advantage, that it's compatible with Taylor UUCP 1.04 and 1.05. You might want Taylor UUCP for better UUCP throughput using Taylor UUCP's bidirectional i-proto. Here is an example for the /etc/uucp/Dialers file, it introduces additionally the option of using Hardware Handshaking between modem and computer: zyxel =,-, "" P_ZERO "" \dA\pTM1S42.6=1\r\c OK\r \EATDT\T\r\c CONNECT STTY=crtscts Note: this has to be _ONE_ line !!! Last Updated: April 27, 1995. 36) Do the Sun serial ports support RTS/CTS flow control? The serial port hardware can do CTS-based control of the flow of data *from* the Sun *out* the serial port automatically. The tty driver option for that is the CRTSCTS option; it can be specified in: the "printcap" "ms" capability for a printer; in the "gettytab" "ms", "m0", "m1", or "m2" capabilities for a dial-in port; the "STTY=" option for a dial-out line for UUCP or "cu" [check the UUCP documentation for details]; and can be specified with the "hf" capability in "/etc/remote" for "tip". The hardware cannot directly do RTS-based control of the flow of data *into* the Sun, and the software does not currently support controlling the flow of data into the Sun with RTS. NOTE: the EEPROM options in newer Suns do not affect the flow control performed by the OS; in fact, the OS ignores the "ttya-mode", "ttyb-mode", "ttya-rts-dtr-off", and "ttyb-rts-dtr-off" EEPROM options entirely. You don't need to set them to change the way the OS handles the tty, and even if you do set them, it won't change the way the OS handles the tty. Sun has released a new jumbo tty patch 100513-04 for SunOS 4.1.2 and 4.1.3 that incorporates changes to the tty driver to support RTS/CTS handshaking. Anyone trying to get RTS/CTS handshaking to work should get this patch. 37) How do I specify that a serial port should, or should not, ignore the state of the Carrier Detect line? Prior to SunOS 4.1, you do so either by: changing the "flags" field for the serial port device in the kernel "config" file, re-running "config", rebuilding the kernel, and rebooting with the new kernel; or, on the Sun-4c machines: changing the setting of the "ttya-ignore-cd" or "ttyb-ignore-cd" EEPROM settings if the port is one of the CPU serial ports. In SunOS 4.1 (and, I think, some SunOS 4.0[.x] releases for the Sun386i), you do so by changing the "/etc/ttytab" line for the port in question to have the "local" attribute if CD is to be ignored, or not to have it if CD is not to be ignored, and running the "ttysoftcar" command to tell the kernel that the status of the "ignore CD" flag should be changed. In 4.1, there's no need to change the EEPROM setting to change SunOS's behavior; it may affect the PROM's behavior, but that's the only reason why it'd be necessary. 38) I put in a new "termcap" entry, or updated an existing "termcap" entry, for a terminal, but "vi" doesn't seem to know about my change. Why? The "vi" in SunOS 4.1[.x] is based on the System V Release 3.1 "vi", because that version of "vi" supports 8-bit character sets. That version of "vi" uses "terminfo", not "termcap"; you have to change the "terminfo" entry for the terminal. You may first have to convert the compiled "terminfo" entry to a text entry; "/usr/5bin/infocmp -I " will write the text of the "terminfo" entry for the terminal to its standard output. If you already have a "termcap" entry, you can convert it to a "terminfo" entry with "/usr/5bin/captoinfo". A text "terminfo" entry must be recompiled in order for programs using "terminfo" to use it; "/usr/5bin/tic" will recompile it. 39) I have a Type 5 keyboard, and find its placement of the Caps Lock, Control, and Esc keys inconvenient. How do I remedy this? Well, one remedy may be to buy the "UNIX layout" version of the Type 5; this option seems, unfortunately, to be little-known to Sun customers, and Sun may not be promoting it as they should. That keyboard has a layout much more friendly to the traditional UNIX user than do the normal PC-style layouts for the Type 5. If you don't have that option, you can use the appropriate program to reprogram the keys; see the next question. 40) How can I move keys around on a Sun keyboard, for example exchanging the Caps Lock and Control keys on a Type 5 keyboard? It depends on which window system you're running, if any. If you're not using any window system, or you're using a window system such as SunView that uses the OS's keyboard event translation mechanism, you can dump the tables used by the OS's keyboard event translation mechanism with the "dumpkeys" command, and load changes to that table with the "loadkeys" command; see LOADKEYS(1). If you're using X11 - either in its MIT incarnation, or Sun's Open Windows incarnation - or some other window system that shuts off the OS's keyboard event translation mechanism, you need to use the window system's commands, if any, for that function. In X11, the command for that is "xmodmap"; its translation tables can be printed with "xmodmap -pk", and changes to that table can be loaded with "xmodmap" as well. NOTE: in the particular case of the Control and Caps Lock keys, while MIT X appears to handle interchanging those two keys correctly, so that the new Caps Lock key is a toggle and the new Control key is not, some versions of Open Windows do not - even though the keys have had their mappings exchanged, the window system server still thinks that the *old* Caps Lock key, which is now the Control key, should be a toggle, and that the *old* Control key, which is now the Caps Lock key, should not be a toggle. [Here is a work-around for this problem, provided by Mark Plotnick (mp@allegra.att.COM)]: Copy the appropriate keytable (e.g. /usr/openwin/etc/keytables/US4.kt) to $HOME/.keytable, and change the 2nd attribute character in a key's attributes field to N or P depending on whether the key should have "pseudolock". $ diff /usr/openwin/etc/keytables/US4.kt /usr/gre/.keytable 78,79c78,79 < lock 119 # CapsLock < control 76 # Control --- > lock 76 # CapsLock > control 119 # Control 226c226 < 76 NN XK_Control_L --- > 76 NP XK_Caps_Lock 278c278 < 119 NP XK_Caps_Lock --- > 119 NN XK_Control_L 41) My Sun doesn't have an ANSI C compiler. How can I get one? SunOS releases prior to 5.x come with a C compiler. However, it was an old compiler, and it didn't support ANSI C syntax or ANSI C features. The SunSoft Catalyst CD #5 contains the binaries for the GNU C compiler for Solaris 1.x and 2.x. You should get the latest version of GCC and compile it using this compiler. Many vendors offer ANSI C compilers for SunOS. Sun sells Sun C 1.1 for SPARC, which includes an ANSI C compiler (although not a full ANSI C environment, i.e. it doesn't necessarily include all the ANSI C include files or library routines); various other vendors (Lucid? Others?) sell ANSI C compilers as well. The Free Software Foundation's GCC also supports ANSI C syntax and ANSI C features. It can be FTP'ed in source form from many sites, and in binary form from some sites. A compiled version of the latest GCC for SunOS 5.x is available from prep.ai.mit.edu. The directory containing these files is /pub/gnu/sparc-sun-solaris2 You need to get the following files: gzip-binaries-1.x.x.tar INSTALL.gcc gcc-binaries-2.x.x.tar.gz Note: You need the gzip binaries to ungzip the gcc binaries. After obtaining GCC, you will need to run fixincludes. The INSTALL.gcc file will tell you how. Note: The following sites mirror the GNU software distribution from prep.ai.mit.edu: ASIA: utsun.s.u-tokyo.ac.jp:/ftpsync/prep, cair-archive.kaist.ac.kr:/pub/gnu/gnu.mit AUSTRALIA: archie.oz.au:/gnu (archie.oz or archie.oz.au for ACSnet) AFRICA: ftp.sun.ac.za:/pub/gnu MIDDLE-EAST: ftp.technion.ac.il:/pub/unsupported/gnu EUROPE: irisa.irisa.fr:/pub/gnu, grasp1.univ-lyon1.fr:pub/gnu, ftp.mcc.ac.uk, unix.hensa.ac.uk:/pub/uunet/systems/gnu, src.doc.ic.ac.uk:/gnu, ftp.win.tue.nl, ugle.unit.no, ftp.denet.dk, ftp.informatik.rwth-aachen.de:/pub/gnu, ftp.informatik.tu-muenchen.de, ftp.eunet.ch, nic.switch.ch:/mirror/gnu, nic.funet.fi:/pub/gnu, isy.liu.se, ftp.stacken.kth.se, ftp.luth.se:/pub/unix/gnu, archive.eu.net CANADA: ftp.cs.ubc.ca:/mirror2/gnu USA: wuarchive.wustl.edu:/mirrors/gnu, labrea.stanford.edu, ftp.kpc.com:/pub/mirror/gnu, ftp.cs.widener.edu, col.hp.com:/mirrors/gnu, ftp.cs.columbia.edu:/archives/gnu/prep, gatekeeper.dec.com:/pub/GNU, ftp.uu.net:/systems/gnu You should check the site close to you before ftping to prep. 42) How do I change the time zone setting on my machine? In releases prior to SunOS 4.0, you will have to reconfigure your kernel, recompile it, install the new kernel, and reboot. See the documentation on kernel configuration. In SunOS 4.0 and later releases, you will need to run the "zic" command with the "-l" flag, with the appropriate time zone setting as the argument. For example, to set the time zone to US Eastern Time, do: zic -l US/Eastern to set it to the proper setting for Great Britain and Eire, do: zic -l GB-Eire and so on. You will then probably want to reboot your machine, in order to: 1) cause any daemons started before the time zone was changed to restart, and pick up the new time zone; 2) run "tzsetup" for the benefit of old pre-SunOS 4.0 binaries, old programs not converted to use the new routines to convert local time to UNIX time, and Calendar Manager. You can also manually link "/usr/share/lib/zoneinfo/localtime" to the appropriate time zone file, but there's really no point in doing so when "zic -l" will do that for you. In Solaris 2.x, you do it the same way you do it on any other SVR4 system - you put a line that says TZ=