|Posted by: Mycota Dec 20 02, 01:14 AM GMT|
| If you have any unused inside heated space & any hepa type filter.
A 10 X 100 roll of heavy duty black plastic @ Home Depot or Lowes, only runs around $20 bucks.
A roll like that will carpet a room, ceiling, floor walls & all, with a few hours work.
All you need is a screw driver (or screw gun), a $4 box of 3/4 inch sheet rock screws & a little ingenuity.
Once you have that sucker fully - ceiling, floor & wall papered with plastic. You have the makings of a quasi/clean grow room.
Then, simply choose half the space, as a fruiting chamber & the other half as a work & incubation space. Then, seperate the two, with a plastic wall or curtain.
A hepa filter, 1 or 2 humidifiers, a timer (possibly a small ceramic heater) & some shelves -- and your cooking.
Learn seed/grain spawn jars, G2G transfers & bulk substrate - then stand back & watch out.
Always remember. A secret it not a secret, if more than you alone know it. You might be able to control yourself. You will never be able to control what others - say or do. Because sh*t happens.
So, who is going to "Burning Man" next year?
|Posted by: Molester Dec 20 02, 05:57 AM GMT|
|good idea, but I'd use an adhesive rather than screws. If moisture builds up between the plastic and the wall, you'll be payin more than expected.|
|Posted by: pixie Dec 20 02, 07:36 AM GMT|
| if im in good enough shape
may have to put it off another year
but im going
|Posted by: Fred Garvin Dec 20 02, 07:49 AM GMT|
| Man I sure do want to make it to Burning Man one of these years. I'm shooting for this year, but hell I've said that for many years!
|Posted by: Mycota Dec 20 02, 01:06 PM GMT|
You might want to "rethink" using an adhesive. That would make the sucker a little tough to take down.
With a tiny bit of planning, you can seal it tight. Simply overlap the plastic joints, a foot or more. Then - use a plastic tape - to double seal the joint overlays.
Moreover, if well planned, you try to created a "positive pressure" chamber. Meaning, rig an air pump, with hepa type filter & timer, to pump volumes of air into the chamber. Plan a small air vent - out (as in like a small bore pvc pipe), then cover it with some furnace filter material, to create "back/pressure". Meaning, more air going in, than can exit.
That way, you can create positive back pressure.
If you have two (2) hepa type filters? Run the other inside the room, on a timer. That way - your air is double filtered.
Also, lay some thicker vinyl type runner on the floor - where you walk, stand or work. To protect the floor layer of plastic, from getting punctured.
Look around at second hand stores, used store fixture places and/or used office furniture places. You can often find crome or stainless steel flat racks, for cheap, you can make long rows of WIDE shelving out of, with a little ingenuity.
A little scrounging & planning will go a long way.
|Posted by: DirtyWOP Dec 20 02, 03:31 PM GMT|
| yup yup
a little ingeniuity and a lot of tape
|Posted by: steveoi812 Dec 20 02, 08:10 PM GMT|
| like this, mycota?http://misteroneonone.gq.nu/
I dream of a grow room like this...
|Posted by: steveoi812 Dec 21 02, 12:14 AM GMT|
| here are the pics
|Posted by: steveoi812 Dec 21 02, 12:16 AM GMT|
| #2 Damn
|Posted by: steveoi812 Dec 21 02, 12:18 AM GMT|
|Posted by: steveoi812 Dec 21 02, 12:19 AM GMT|
|Posted by: jayello Dec 21 02, 01:24 AM GMT|
| wow that is nice!
it would scare the hell outta me to use that to its full potential though. unless i was in a more reasonable country.
|Posted by: Molester Dec 21 02, 06:30 AM GMT|
You're right, don't want goop stuck to the wall afterward if you plan on taking it down. There are also some paints/coatings that will do the trick to protect the walls, if you have the cash, time and patience. Personally I'd avoid the plastic lining altogether and do this, just because I'm fussy about the aesthetics of it. Thats why I don't like tape too. But I really shouldn't be so fussy and tape garbage bags all over, seeing as I have about eight dollars to my name right now. And those are Canadian dollars!
|Posted by: DirtyWOP Dec 21 02, 08:26 AM GMT|
there are some dangerous ideas flying around in my head right now!
This needs to stop.
You guys are a bad influence......
|Posted by: Mycota Dec 21 02, 03:28 PM GMT|
Yup, someone went to some time & trouble to put that big baby togather.
Ya know, hindsight is a strange thing. I realize now. I should not have started this thread. It could lead someone astray. That was not my intent. I was just posting the possibility of doing a small scale room. Not, a gross weight production facility.
No one wants to end up being Bubba'a cellmate. You know Bubba? He is the great big strong stupid guy, with the low IQ, doing 20 to life for murder, has done 10 years, is horny & might think you have a cute ASS.
Be wise, keep it small.
|Posted by: EvilShroomer Dec 23 02, 05:38 PM GMT|
|do i hear DEA? man , with a room like that , and pics like that , shit... hopefully , doing stuff like that means, you live in a freedom country|
|Posted by: Fred Garvin Dec 23 02, 06:15 PM GMT|
|Hey, I wouldn't sweat it. Putting the info out there is a good thing. Whatever someone chooses to do with it is his or her decision. Personal responsibility still applies.|
Projects : Grow Chambers & Clean Rooms : Archive Main : Shroom Glossary