PF TEK mushroom liqueur tecknique

by Psylocybe Fanaticus

Nan's Nook : Archives : Misc Teks : Lab/Extraction Info : Magic Extraction

Also see: PF Extraction Update


This technique describes how to extract psilocybin from magic mushrooms with pure 200 proof ethyl alcohol and make a magic mushroom liqueur of concentrated psilocybin to effect a powerful psychedelic dose as potent as desired. The entire process involves only the shrooms and alcohol. The alcohol is untainted with chemicals and poisons because it can be easily acquired from a liquor store (United States) either over the counter (in some states) or with a special permit (most states - see end of article section - "procuring 200 proof ethyl alcohol from a liquor store").

ALCOHOL EXTRACTION

1. Acquire quality psilocybe cubensis shrooms (harvested before or just as the veils open and cool dried with desiccant). The more shrooms used in the beginning, the more potent the concentration can be when finished. Use at least several grams of dried shroom material to make the process worthwhile and effective. The shrooms need to be thoroughly dry (rock hard) to allow pulverization. To pulverize the shrooms, put them into a small strong zip lock plastic bag (freezer bag), cover the bag with a magazine (for protection of the bag) and pound it with the rubber heel of a large shoe. After pulverization, pour the shroom material into a bottle that has a tight fitting leak proof cap. Add enough alcohol to cover the shroom material to make a loose slurry. Shake the bottle well and let it sit for 24 hours. Shake it now and then to activate the extraction.

2. After 24 hours of soaking, filter off the alcohol. Inexpensive dust-pollen masks make excellent filters for the slurry. These are available at hardware, drug and paint stores. They are usually white or tan colored, fit over the nose and mouth and are held on to the face by a rubber band attached to the filter. Fashion the filter over the mouth of a drinking glass. Shake up the bottle of slurry, and pour some slurry into the filter. Squeeze the filter and slurry to extract the alcohol. There are many details to deal with, but doing it once reveals them all. Experience is the best teacher. Store the extracted alcohol in a fresh bottle.

3. Retrieve the shroom material from the filters and resoak the extracted shroom material with fresh alcohol and repeat steps 1 and 2 (secondary filtration and reclamation).

EVAPORATION AND CONCENTRATION

Combine the alcohol extracts into a glass. Place a small electric fan (small desk clip on fans are perfect) near the glass and point the air flow directly down into the glass until the surface of the alcohol ripples. This will speed the evaporation and concentration. The process will take several hours. The more alcohol extract - the longer the evaporation time. As the alcohol evaporates and the level recedes down into the glass, wash the residue that adheres to the inside of the glass back into the solution. Any fumes that are generated will be harmless because the alcohol is a non poisonous drinkable spirit. Keep flames away from the solution - pure alcohol is very flammable.

Evaporate the extract down to the concentration desired. 1 to 3 or more grams of dried shroom material to 1cc of alcohol is a potent brew. The more concentrated it becomes, the less alcohol needs to be consumed. When taking a dose, the alcohol can be evaported and the shroom extract taken. Dispense the psilo-liqueur with a syringe for accuracy. Accuracy is important, because a slight over calculation could put a slightly reluctant psychonaut on pluto when only the moon was targeted.

The concentrated shroom liqueur will have a pungent mushroomy aroma (like fungi perfume). Store it in small screw cap bottles or vials in the freezer. Alcohol doesn't freeze solid and will remain liquid.

PROCURING 200 PROOF ETHYL ALCOHOL FROM A LIQUOR STORE

First, call a well stocked liquor store and ask if they have 200 proof anhydrous ethyl alcohol. Full service liquor stores supply hospitals and laboratories with 200 proof anhydrous ethyl (100% pure ethyl alcohol - no water) in the United States. 200 proof is preferred because it has no water. 190 proof (95% ethyl - 5% water) is ok but 5% residual water is a negative, especially when evaporated down. If the store doesn't have 200 proof, the salespeople will know where to get it.

If a permit is needed, call the state liquor board (usually in the State Capital) and ask for an application to get an ethyl alcohol permit. The fee is 5 or 10 dollars. On the application will be a question asking what the use of the alcohol will be. Write what they more or less want to hear. State that the use of the alcohol will be for "non-toxic surface sterilizing plus herb extraction - preservation - tincture - and perfume making" (or something to that effect). The poison warnings on the alcohol bottles and this idiotic red tape are just bureaucratic nonsense that results in the state making a big fat bundle off of the sale.

SUPPLY LIST


Misc Teks : PF TEK Main Page : Shroom Glossary