Asri-unix.499 net.unix-wizards utcsrgv!utzoo!decvax!ucbvax!menlo70!sri-unix!jeff@UCLA-Security Wed Jan 13 20:17:17 1982 RL problem From: jeff at UCLA-Security (Jeff Schaffer) I have an 11/44 with dual RL02's on it and am running DEC's modified V7 on it. (Dec distribution release date - ~ June 1980) I am having a very interesting problem occur. The symptom is that at system boot time I can boot one Unix load module but not an identical copy of it. The error coming back is a header not found from the RL02. After some tracing, we found that whether or not the system would come up was dependent upon where the head on the RL02 is last positioned (where the last block of the load module is). If the last block is on a cylinder <= EVERYTHING A THEN OF ON DISK), CYLINDER="" IF 255 IS IT FINE. (1/2 THE> 256, the header not found errors occur. I have tried this on 3 different 11/44 systems, so it is not just a bad board in our system. Has anyone else found this? Is there a design flaw in the RL controller or a driver mod that I might not be aware of? Any help would be appreciated. Jeff Schaffer ----------------------------------------------------------------- gopher://quux.org/ conversion by John Goerzen of http://communication.ucsd.edu/A-News/ This Usenet Oldnews Archive article may be copied and distributed freely, provided: 1. There is no money collected for the text(s) of the articles. 2. The following notice remains appended to each copy: The Usenet Oldnews Archive: Compilation Copyright (C) 1981, 1996 Bruce Jones, Henry Spencer, David Wiseman.