-------------------------------------------------------------------------- Setup hints for using BGFAX with Intermail 2.21 09-14-93 B.J. Guillot FidoNet: 106/400 InterNet: st1r8@jetson.uh.edu -------------------------------------------------------------------------- Keep in mind that fax commands cannot be stored in NVRAM. Here is the relevant information from IMSETUP ... [IMSETUP] Modem -> Advanced Setup -> Command Strings Init-1 ... atz| Init-2 ... at+fcr=1;+fdcc=1,5,0,2,0,0,0,0| Init-3 ... at+flid="713 555 1212"| [IMSETUP] Modem -> Advanced Setup -> Answer Control Manual answer Yes Force answer at+faa=1a| The force answer string should really be "at+faa=1;a", but this will not fit. The Supra modem will not care. Others might. ------------------------------------------------------------------------- [IMSETUP] Modem -> Advanced Setup -> Connect Strings You will see a list of 14 or so preconfigured connect strings, press to add one. If your modem returns "FAX" on a fax call, like the Supra, use the first string provided. If your modem returns "+FCON" on a fax call, like the PPI FXMT, use the second string. Connect Message Speed EC BBSexit Terminate FAX 19200 N 0 255 +FCON 19200 N 0 255 ------------------------------------------------------------------------- Notice that "BBSexit" is equal to ZERO. IMRUN.BAT should contain something similar to ... @echo off c: cd\im im if errorlevel 255 bgfax /fax c:\bgfax 1 z if errorlevel 103 maint.bat if errorlevel 102 toss.bat if errorlevel 101 local.bat if errorlevel 100 dobbs.bat The /fax means your modem reports "FAX". If it reports "+FCON" use one of these two lines. if errorlevel 255 bgfax /fcon c:\bgfax 1 z or if errorlevel 255 bgfax /fast c:\bgfax 1 z You will have to experiment to determine which is correct. ========================================================================== Regards, B.J. Guillot