ESSENTIAL DATA DUPLICATOR (EDD) PROGRAM LIST #3-8 BROUGHT TO YOU BY THE [--] MINUTE MAN [--] Pardon all the typing errors What is an Essential Data Duplicator Program Information List??? This is a list of copy-protected programs which Edd has been known to copy. This list would contain the program name, the publishers name, and all known instruction for making back up copies. We compile this list from information gathered from EDD owners all around the world. FINDING INSTRUCTIONS FOR COPING DISKS: First of all ... note: if you are backing up Apple III software, remember to always use one of the synchronize track processing modes; mode#2, #5, #6. If you are using a IIe or IIc, the CAPS LOCK key must be in the DOWN position for EDD to run properly. This list is divided into two sections; Programs listed by name and Protection used by companies. The "Programs listed by name" section is an alphabetical order listing of protected programs by program name. To the right of each name, references the software company in the "Protections Used By The Company" sections to actually find information for copying that disk. Since many software companies will use the same protection on all or most of their disks, if the name of the disk you are trying to copy is not located in the "Programs Listed By Name" section, try locating the company who publishes that disk in the "Protections Used By Company" section of the list. You have a very good chance that one of the instructions will work for that particular disk. Here is an example for using this list to find the instructions for a disk. Suppose you want to make a back up copy of the disk named, "MICRO COURIER". First, look up MICRO COURIER in the "Programs Listed By Name" section of the list. It says, "MICRO COURIER:MICA#a". This tell us that the protection used on this disk is "MICA#a". Now we look up "MICA" in the "Protections Used By Company" section of the list. This shows that we used the abbreviation "MICA" for the company "MICROCOM INC." (who is the publisher for this disk). Since we know that the protection used is protection "#a"; locate protection #a for this company. Here we find instructions for copying this disk: a. t22 t0-t23 parm 28=3 HOW TO USE THE INSTRUCTION FOUND IN THE LIST: To make a back up copy of a program found in the list, you will need to know the coding used: key: t = TRACK START and/or END inc inc = INCREMENT TRACK value parm mode# = PROCESS MODE# normal = NORMAL; default values (push Return for all prompts Here is an example: Let's say you want to copy a program with the instruction t0-t23 To copy this disk you will need to copy the range of tracks from track "0" through track "23". So, when copying the disk, enter the value "0" when EDD ask you for the START TRACK (it's already preset to "0"), and enter the value "23" when EDD asks for the END TRACK. Since the instructions don't tell you to change anything else, don't. Simply just press Return for all prompts. Here is an more involved instruction example: t0 parm 28=1 t1-t9 inc 4 tA-t22 mode#2 You will notice these instructions use three lines of information. Since there are three lines to this instruction and each line starts with a "t" (track) this means that there are three ranges of tracks to copy on this disk. The first range, "t0 parm 28=1" means that you will need to change the parameter "28" to the value of "1" (see OPTION 2). After the parameter is changed (any parameters that need to be changed for a range of tracks are always changed first), enter a "0" for the START TRACK. Since "t0" (track 0) is the only track specified, you will also need to enter it for the END TRACK. There is no additional information for this range, so, just press return for all other prompts. After EDD is done processing track "0", EDD will say "process done". At this point, one range of tracks has been copied. The second range of tracks says, "t1-t9 inc 4". Enter the value "1" for the START TRACK, and a "9" for the END TRACK. When EDD asks you for the INC TRACK value enter a "4". After you copy this second range of tracks, EDD will again say "process done". The third range of tracks, "tA-t22 mode#2" is the last range that needs to be copied. Enter an "A" when EDD asks for the START TRACK, and a "22" for the END TRACK. When EDD asks for the PROCESS MODE, enter a "2" (synchronize tracks mode). NOTE: You MUST copy the ranges of tracks in the order they are listed. One reason for this is because any parameter that may have been changed for a previously copied range of tracks stays changed for the next range. If the list tells you to "write-protect before running", be sure you put a write- protect sticker on the duplicate disk covering the notch, BEFORE attempting booting that disk! A good rule of thumb is: If an original disk has a write- protect sticker on it, always put a sticker on the duplicate disk before running it. Disk drive speed can be very critical on some disks. -END-