Author
|
Topic: concentrating nitromethane?
|
Omogen
A New Voice
Member # 1017
Member Rated:
|
posted June 13, 2002 03:26 PM
i have searched thru the forum for a way to concetrating nitromethane but i didnt find anything...then i went thru some pdf`s and som texts and i found out two ways...but they are not similar
in the first it said something about a vaccum destiller but i didnt get it how to set it all up.
in the otherone it said that you should concentrate it with a usual destiller to boil away the methanol...
the only nitromethane i can get hold of is RC fuel but which technique should i use and if it is the vaccum destiller can someone give me a link with some photos or such...
thnx
Posts: 21 | From: Stockholm, Sweden | Registered: Oct 2001
| IP: Logged
|
|
mongo blongo
Sr. Researcher
Member # 783
Member Rated:
|
posted June 13, 2002 04:15 PM
Um.. They do sound the same! It isn't concentrating it. It's separating the methanol and nitromethane. If you don't know how to set up a still then stick to low explosives for the time being. This procedure could be very dangerous! They are exactly the same thing except that one uses a vacuum pump. This is so that lower pressure will lower the boiling point of the methanol hence you can distill it with less heat. Using the pump will be safer. [ June 13, 2002, 04:22 PM: Message edited by: mongo blongo ]
-------------------- AAARRRRRHHH! My beautiful eyes! It burns! The goggles do nothing!AAARRRRRHHH!
Posts: 500 | From: I live in a Creosote Bush! | Registered: Jun 2001
| IP: Logged
|
|
Omogen
A New Voice
Member # 1017
Member Rated:
|
posted June 13, 2002 04:57 PM
i know how to setup a usual destiller but that vaccum destiller i dont get.
its not just methanol and nitromethane in RC fuel there are more things. It was described in Kitchen improved plastic explosives 2 how to separate the nitromethane from the other chemicals in RC fuel with a vaccum destiller
Posts: 21 | From: Stockholm, Sweden | Registered: Oct 2001
| IP: Logged
|
|
mongo blongo
Sr. Researcher
Member # 783
Member Rated:
|
posted June 13, 2002 05:37 PM
Sorry I thought you didn't know how to distill something. Could you post the procedure? (I don't have Kitchen improved plastic explosives 2 at hand) Then I could help you more.
-------------------- AAARRRRRHHH! My beautiful eyes! It burns! The goggles do nothing!AAARRRRRHHH!
Posts: 500 | From: I live in a Creosote Bush! | Registered: Jun 2001
| IP: Logged
|
|
Omogen
A New Voice
Member # 1017
Member Rated:
|
posted June 13, 2002 06:23 PM
SEPARATION FROM HOBBY RACING FUEL
Obtain some model airplane racing fuel (e.g. SIG Champion 35, SIG Corporation). This or an equivalent is available from a hobby store. Place one quart in a 2000 ml flask or a narrow necked gallon jar. Place a one hole stopper in this container with a stainless or glass tubing running just through the stopper. The other end of this tubing is placed through another stopper (two hole) fitted into another gallon jar or flask. This tubing should reach to the bottom of the second container. The second hole in this stopper is hooked to a vacuum source. The first flask is placed in a hot oil or water bath at 50 degrees C. The second jar is placed in a salted ice bath. The vacuum is then drawn. The nitro methane and methanol will begin to collect in the second container. This is continued until only about 5-10% of the solution in the first flask remains. The liquid from the second flask is removed after the vacuum is released. This is poured into a shallow pyrex or stainless steel pan or dish. Let this set over night. This will allow the methanol to evaporate. The remaining liquid is 85-95% nitro methane with the remainder being methanol. This compound will work almost as well as a pure compound.
//i dont get the vaccum destill setup
Posts: 21 | From: Stockholm, Sweden | Registered: Oct 2001
| IP: Logged
|
|
Mick
Researcher
Member # 206
Member Rated:
|
posted June 13, 2002 06:51 PM
nitromethane is made up of three things methanol, 80% nitromethane, 15% oil(castor), 5%
blah, i was going to explain it all, but i will suffice with, this method of extracting NM is a pathetic way of doing it, it takes for ever, the yields are worthless, and it cost to much. if a 1 litre bottle of 15% NM fuel costs $20, then that bottle of fuel only contains 150ml of NM, after the extraction process you'll be lucky to get 100ml.
Posts: 396 | Registered: Oct 2000
| IP: Logged
|
|
DarkAngel
Sr. Researcher
Member # 86
|
posted June 14, 2002 05:40 AM
You also have Race Car fuel that contains 45% NM. If they don't have pure NM ask if they can order it or if they know where to get it.
-------------------- Im an explosive expert,if you see me running run after me!
Posts: 683 | From: ? | Registered: Sep 2000
| IP: Logged
|
|
DBSP
Researcher
Member # 790
Member Rated:
|
posted June 14, 2002 07:29 AM
Omogen, do some reaserch for rc hobby stores in sweden, it doesn't take long to find one that sells NM, and since you live in the most populated area in sweden you shuldn't have any problems finding a rc store that sells NM. The place where I buy NM isn't larger than a normal kitchen, maby smaller. And if they have it the larger shops in stockholm must have it.
-------------------- http://w1.478.telia.com/~u47804009/E&W/
Posts: 457 | From: Sweden | Registered: Jun 2001
| IP: Logged
|
|
A_W
Lab Assistant
Member # 1054
|
posted June 14, 2002 07:57 AM
I'm going to Stockholm tomorrow! Do you have any names of good hobby-shops that sell NM?
Posts: 102 | From: Norway | Registered: Jan 2002
| IP: Logged
|
|
Omogen
A New Voice
Member # 1017
Member Rated:
|
posted June 14, 2002 09:09 AM
yes i know there are RC shops and i can buy nitromethane but the problem is that i want to buy pure nitromethane and that is hard. Ammonium nitrate is also a little probb for me cuz i am too lazy...but i needed ill go to "lantmännen" and buy some AN fertilizer or just check a cold pack.
Posts: 21 | From: Stockholm, Sweden | Registered: Oct 2001
| IP: Logged
|
|
mongo blongo
Sr. Researcher
Member # 783
Member Rated:
|
posted June 14, 2002 09:53 AM
To use a vacuum while distilling is easy.You need a vacuum pump or a pump from a freezer. All you need to do is have a pipe from the pump to your receiving flask. Your still setup must be air tight so if you are using glassware you can coat the joints with some grease to make the joints air tight. When you have done this just switch on the pump and when the air has been evacuated you can start distilling. The pump must be left on throughout the whole process. As people said, it's easier to just find pure nitromethane.
-------------------- AAARRRRRHHH! My beautiful eyes! It burns! The goggles do nothing!AAARRRRRHHH!
Posts: 500 | From: I live in a Creosote Bush! | Registered: Jun 2001
| IP: Logged
|
|
|
Anthony
Moderator
Member # 72
Member Rated:
|
posted June 14, 2002 12:49 PM
I once tried vacuum distilling 20% fuel but only ever ended up with a mixture of methanol/NM. Like has been said, it just isn't worth the hassle seeing as you don't save any money.
I'd imagine that 45% NM fuel would work well for ANNM if you used a larger blasting cap.
Saying "I'm too lazy" is the wrong attitude. People won't help you if you act like that.
Posts: 3259 | From: England | Registered: Sep 2000
| IP: Logged
|
|
xoo1246
Sr. Researcher
Member # 1089
Member Rated:
|
posted June 14, 2002 02:01 PM
quote: The place where I buy NM isn't larger than a normal kitchen
I belive we shop at the same place.... [ June 14, 2002, 02:03 PM: Message edited by: xoo1246 ]
-------------------- "Propaganda is to a democracy what violence is to a dictatorship." "The market knows the price of everything but the value of nothing."
Posts: 536 | From: Sweden | Registered: Mar 2002
| IP: Logged
|
|
Omogen
A New Voice
Member # 1017
Member Rated:
|
posted June 14, 2002 02:13 PM
thanks DBSP i really appreciated that
ill try to get my lazy ass to that place and check it out sometime this week
Posts: 21 | From: Stockholm, Sweden | Registered: Oct 2001
| IP: Logged
|
|
rc
Bottle Washer
Member # 1168
Rate Member
|
posted June 18, 2002 02:16 PM
how can you dry nitromethane? maybe adding some ammonium nitrate would work?
though i have detonated 65 AN/ 25 NM/ 10 water succesfully. so water doesn't ruin the detonation but it fills space and so lowers the power.
if there is a good way to remove the water from NM, you could just leave some rc-fuel outside for a couple of sunny days and when the methanol has evaporated then just collect the NM/water by distilling. After that you could remove the water by adding nh4no3 and filtering maybe?
Posts: 31 | Registered: Mar 2002
| IP: Logged
|
|
VX
Lab Assistant
Member # 1023
Member Rated:
|
posted June 18, 2002 02:32 PM
Why ammonium nitrate?
Perhaps a better idea would be to place a small container (200ml beaker) of NM/ water mix, in a larger container (ice cream tub), and place some calcium chloride or concentrated sulphuric acid in the larger container. Place a lid on the larger container make airtight with some tape and leave for a few days.
-------------------- Don't play with matches!
Posts: 113 | From: UK | Registered: Oct 2001
| IP: Logged
|
|
10fingers
Sr. Researcher
Member # 67
Member Rated:
|
posted June 18, 2002 04:34 PM
It's been said but don't waste your time separating Nitromethane from hobby racing fuel if it's at all possible to fine pure stuff. I can get 25% racing fuel for around $26.00 per gallon. If I separated it all out I would get 1 quart of nitromethane. I can buy a gallon of 99% nitromethane including shipping for $45.00. I did find some interesting info awhile back on ANNM. It said that ANNM is actually more powerful if it contains some methanol. It looked like reliable info, if anyone wants more details I can try to find it.
Posts: 633 | From: USA | Registered: Sep 2000
| IP: Logged
|
|
Foxtrot83
Amateur
Member # 216
Rate Member
|
posted June 26, 2002 02:38 PM
This may be alittle of topic, but I wanted to know the rate of detonation difference between say 100% nitromethane and 60% nitromethane. Also, what formula could be used to find out the detonation difference for other percentages of nitro. I can get my hand on 60% nitro with ease but it wouldn't hurt to be able to find out the detonation rate of ANNM with lower concentrations.
It's good to see the Forum up and kicking again...
Posts: 72 | From: USA | Registered: Oct 2000
| IP: Logged
|
|
SATANIC
Researcher
Member # 140
Member Rated:
|
posted June 27, 2002 08:08 PM
Well, after much asking around and searching stores, the best i can find is 15% RC fuel.
rc, are you sure that the methanol would evaporate first? surely the nitro methane, being so volatile, would evaoprate first, leaving methanol, (and castor oil, which is a few % in every batch)
I know i don't have the time / patience / equipment for vacuum distilling, but if it was really that easy (evaporating) i wouldn't mind spending a bit on the expensive rc fuel.
10fingers, if you can find that info, i would certainly appreciate it. (want to try ANNM soon........)
Posts: 300 | From: Australia | Registered: Sep 2000
| IP: Logged
|
|
10fingers
Sr. Researcher
Member # 67
Member Rated:
|
posted June 27, 2002 09:09 PM
The info I had I got off of Wantsomfets site. For some reason the address doesn't work anymore. If you go to Flashbangboom and then click on the link for Wantsomfets Kangaroo corner you can get there. Theres a file on ANNM with some good info. The optimim ratio for a AN/NM/Me composition was 1000 gms AN, 185 gms or 162 mls Nitromethane, 84 gms or 106 mls Methanol. There were several other formulas there with some data on each.
Posts: 633 | From: USA | Registered: Sep 2000
| IP: Logged
|
|
megalomania
Head Scientist and Administrator
Member # 3
Member Rated:
|
posted June 27, 2002 10:57 PM
That method for distilling nitromethane sounds horrible to me, as several of you have pointed out from experience. That setup is completely inappropriate and wasteful the way it is. A simple distillation of chemicals with boiling points as similar as nitromethane (101.2 C) and methyl alcohol (64.6 C) would end up being nearly the same in the end, only minus the castor oil. A far more effective method would be to do a fractional distillation to isolate the methyl alcohol. One may try the simple distillation first to remove the castor oil, but the vacuum setup is unnecessary. Neither chemical forms any dangerous by distilling in the air. All the vacuum would do is lower the boiling points so less heat is needed, and in this case we are talking a heat reduction of maybe 30 C, big deal. That vacuum setup basically has the distilled vapors entering into an open container with a vacuum. What do you think will happen when a gas meets a vacuum? It just gets sucked up. Since nitromethane and methyl alcohol are both volatile, letting them sit out in the open is just plain wasteful. Nitromethane fumes are also highly toxic. I understand that the aforementioned procedure is an improvised one, but even then it is not good. I say nix the vacuum if you don’t have one, and try a fractional distillation if you can. You can dry nitromethane by adding some calcium chloride and redistilling. For further information on nitromethane, including synthesizing your own, visit my website at http://roguesci.org/megalomania/synth/synthesis3.html#nitrometh
-------------------- For the most comprehensive and informative web site on explosives and related topics, go to Megalomania's Controversial Chem Lab at http://www.roguesci.org/megalomania
Posts: 1418 | From: USA | Registered: Sep 2000
| IP: Logged
|
|
rc
Bottle Washer
Member # 1168
Rate Member
|
posted June 30, 2002 03:19 PM
Well I have detonated some NM/methanol/AN. The NM/Methanol mixture was made by distilling using an oil bath. I ended up with a solution which had a strong smell of nitromethane and burned slowly with a green flame.
I don't think the difference between the boiling points(~100C vs. 64,6C) is that critical because ethanol has bp somewhere in mid eighties and still I have been able to get as pure as 78% ethanol(starting from 13%) by using an oil bath and a 2000ml flask.
So if you can't find pure nitromethane and if you have some spare time you can distill some, not so pure though but detonateable, from rc fuel.
Posts: 31 | Registered: Mar 2002
| IP: Logged
|
|